Epson Stylus Pro 9500 Startup Manual page 50

Note:
If the Roll Auto Cut light is on, and the bottom edge of the roll paper
was not cut properly after the previous print job, press
the Cut/Eject button to recut the edge.
9. Press the Pause button.
The print heads move and the paper feeds into the printing
position. READY appears on the LCD panel.
Note:
Even if you do not press the Pause button, the print heads move
and paper feeds into the printing position automatically. READY
appears on the LCD panel.
Now you are ready to print on roll paper. Make the printer
driver settings, then send the print job. See "Printing From
Your PC" on page 3-11 or "Printing From Your Macintosh"
on page 3-16.
Note:
Allow time for the ink to dry thoroughly after printing to ensure the
printout quality.
3-6
Printing and Printer Management