Epson Stylus Pro 9500 Startup Manual page 35

Note:
Use only an Apple System Peripheral-8 cable to connect the printer
to your Macintosh. Do not use a LocalTalk cable.
correct
3. Connect the other end of the interface cable to either the
modem port or printer port on the Macintosh. The ports are
marked with the following icons. (Some Macintosh
PowerBook models have only one serial port.)
modem port
Note:
If your Macintosh has a built-in modem, connect the interface cable
to the printer port.
4. Turn on the printer by pressing the Power button.
5. Turn on your Macintosh.
Now see "Installing the Printer Software on Macintosh" on page
2-5. You must install the printer software before using your
printer.
incorrect
Setting up the Printer with Your Macintosh
printer port
2
2-3