For Using Your Printer With A Macintosh - Epson Stylus Pro 9500 Startup Manual

For using your printer with a Macintosh

To use this printer, your Apple
following system requirements. You also need a USB cable to
connect this printer to Apple Macintosh computers.
Minimum system
PowerPC
System 7.6.1
9 MB of available memory
12 MB of available memory when
background printing is turned on.
Note:
The amount of available memory varies according to the number and
kind of applications that are open. To see how much memory is
available, choose About This Macintosh from the Apple menu and
refer to the memory size (listed in kilobytes) under "Largest Unused
Block" (1,024 K = 1 MB).
The memory requirements above are for printing on A1 (594
841 mm) size paper. These requirements may vary depending on the
size of the paper, the type of application you are using, and the
complexity of the document you want to print.
In addition to these system and memory requirements, you also
need 12 MB of free hard disk space to install your printer software.
To print, you need extra hard disk space amounting to about
double the size of the files you want to print.
® ®
Macintosh must meet the
Recommended system
PowerPC 604e 300 MHz or higher
processor
System 7.6.1 or later
16 MB or more of available
memory
27 MB of available memory when
background printing is turned on.
iii