Lcd Monitor Adjustment - JVC GZ-MC100 Instructions Manual

18
GETTING STARTED
EN
Date/Time Settings
The date/time is recorded on the picture at all times, but
its display can be turned on or off during playback.
( pg. 26, 27)
1
Open the LCD monitor fully.
2
Set the power switch to
the lock button located on the switch.
3
Press MENU. The menu screen appears.
4
Press to select [DISPLAY],
and press . The sub menu
appears.
5
Press to select [CLOCK
ADJUST], and press
month is highlighted.
6
Press to input the month,
and press . Repeat to input
the day, year, hour and minute.
7
Press MENU to return to the normal screen.
Built-in Clock's Rechargeable Lithium Battery
If the camera is not used for approx. 3 months, the clock's
lithium battery will become discharged and the date/time
stored in memory will be lost. When this occurs, first
connect the camera to an AC outlet using the AC adapter
for over 24 hours to charge the clock's rechargeable
lithium battery. Then perform the date/time setting before
using the camera.
Note that the camera can be used without setting the
date/time.
or while pressing down
CAMERA SETTING
BASIC SETTEING
MEMORY CARD SETTING
DISPLAY
QUALITY
WIDE MODE
WIND CUT
. The
SCENE COUNTER
CLOCK ADJUST
BRIGHT
DATE/TIME

LCD Monitor Adjustment

It is necessary to use the LCD monitor for the camera
operation. Make sure to open the LCD monitor whenever
you turn on the camera.
Pull on the bottom end of the LCD monitor to open it.
● The LCD monitor can be rotated 270° (90° downward,
180° upward).
NOTES:
● If the LCD monitor is rotated 180° upward, the LCD monitor
faces to the front. It is useful when using self-timer for
shooting.
● When the LCD monitor is turned approx. 80° to front, the
monitor image appears inverted as it would when viewing a
mirror. However, the actual recorded image does not appear
inverted.