Selecting Recording Medium - JVC GZ-MC100 Instructions Manual

2
To insert a SD card, firmly insert it with its clipped
edge first.
To remove a SD card, push it once. After the SD card
comes out of the camera, pull it out.
● Do not touch the terminal on the reverse side of the label.
3
Close the rear panel firmly until it locks.
To protect valuable files
Slide the write/erase protection tab on the side of the SD
card in the direction of "LOCK". This prevents the SD card
from being recorded over. To record on this SD card, slide
the tab back to the position opposite to "LOCK" before
inserting it.
NOTE:
Before using a new SD card, it is necessary to format the
card. ( pg. 26, 27)
ATTENTION:
Do not insert or remove the SD card while the camera is
turned on, as this may cause the SD card to be corrupted or
cause the camera to become unable to recognize whether or
not the SD card is installed.

Selecting Recording Medium

Select the recording medium before starting recording or
playback.
Example: When recording still images to a CF card
1
Open the LCD monitor fully. (
2
Set the power switch to
the lock button located on the switch.
3
Press MENU. The menu screen appears.
4
Press to select [MEMORY
CARD SETTING], and press
5
Press to select [IMAGE
MODE], and press .
6
Press to select [CF SLOT],
and press .
7
Press MENU to return to the
normal screen.
GETTING STARTED
EN
pg. 18)
or while pressing down
DIS
.
CAMERA SETTING
BASIC SETTING
MEMORY CARD SETTING
DISPLAY
QUALITY
WIDE MODE
COPY/MOVE
NO. RESET
VIDEO MODE
IMAGE MODE
VOICE MODE
FORMAT
CLEAN UP
17