Playback; Basic Playback; Lcd Monitor Brightness Adjustment - JVC 1000MKV*UN*VP Instruction Manual

30
EN
Rewind (2) Button
Play/Pause (4/6) Button
Fast-Forward (3) Button
Speaker
Set to "

LCD Monitor Brightness Adjustment:

to darken.
The Bright Level Indicator is displayed under the Date/Time Display when you play back images recorded in
Wide Mode ( pg. 23).
Speaker Volume Control:
or towards "–" to turn down the volume.
The Speaker Volume Indicator is displayed under the Date/Time Display when you play back images
recorded in Wide Mode (
Still Playback:
1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.
Noise bars will appear and the picture will become monochrome during Still Playback.
If TBC ( pg. 31) is engaged, noise bars will not appear. This mode is called Fine Still.
Shuttle Search:
1) Press 3 for forward or 2 for reverse search during playback.
2) To resume normal playback, press 4/6.
During playback, press and hold 2 or 3 . The search continues as long as you hold the button. Once you
release it, normal playback resumes.
Noise bars appear and pictures may become monochrome or darken during Shuttle Search. This is normal.
Stop (5) Button
BRIGHT Wheel
Power Zoom
Lever (VOL.)
".
Slide the Power Zoom Lever (VOL.) towards "+" to turn up the volume,
pg. 23).
Pauses during playback.
Allows high-speed search in either direction.

PLAYBACK

1
Load a tape (
2
Set the Power Switch to "
To start playback, press 4/6.
•To stop playback, press 5.
•Press 2 to rewind, or 3 to fast-forward the tape
during Stop mode.
NOTES:
The camcorder shuts off automatically after about
5 minutes in Stop mode. To turn on again, set the Power
Switch to "OFF", then to "
When the Power Switch is set to "
monitor is opened at an angle of 60 degrees or more, the
LCD monitor switches on and the viewfinder switches
off automatically to save power.
The playback picture can be viewed in the viewfinder
(with the LCD monitor shut), on the LCD monitor or on
a connected TV (
You can also view the playback picture on the LCD
monitor with it flipped over and retracted.
If a blank portion on the tape is played back, the screen
may become black. This is not a malfunction.
Rotate BRIGHT towards "+" to brighten, or towards "–"

Basic Playback

pg. 13).
".
".
" and the LCD
pg. 32, 33).