Installing The Mobile Rack Docking Case - Vantec EZ-SWAP 2 MRK-300FD-BK Owner's Manual

Installing the Mobile Rack Docking Case

1. Turn OFF the power to your computer and any other connected peripheral
devices. Follow the precautions for static electricity discharge:
• Discharge any static electricity build up in your body by touching a grounded
metal surface such as the computer case, if plugged in.
• During installation procedures, avoid any contact with internal parts.
2. Unplug the power cord from the back of the computer.
3. Remove your computer's cover.
4. Remove the computer's front cover plate from the 5.25-inch drive bay you plan
to install your Mobile Rack into.
5. Remove (separate) the Mobile Rack drive case from the docking case by lifting
the handle and pulling it out.
6. Slide the docking case into the 5.25-inch drive bay.
Mounting
Screws
Docking Case
(All Models)
Install the Mobile Rack Docking Case into the Drive Bay
3-6
Mounting
Screws
Aluminum Mobile Rack