Introduction - Vantec EZ-SWAP 2 MRK-300FD-BK Owner's Manual

3-1 Introduction

Vantec introduces the EZ-Swap 2 – the convenience of a mobile rack with
cooling abilities on par with most dedicated hard drive coolers. The EZ-Swap 2
features front and rear fans to cool the hard drive from all around. It also
features a keyed lock to prevent accidental removal while in use. The EZ-Swap 2
is compatible with all IDE hard drives and has a sleek, professional look.
EZ-Swap 2 Features
• Aluminum case design aides in heat dissipation
• Two fans circulate and exhaust high heat generated by high-speed drives to
maintain a safe operating temperature environment
• Support high-speed 80-pin UDMA-66/100 Ultra IDE drives
• Drive bay module for mounting a 1.0-inch height, 3.5-inch or 2.5-inch device
in a 5.25-inch drive bay
• Supports fixed 3.5-inch hard disk drives
• Convenient pull-out handle
• Safety lock feature
• LED indicators for power and drive activity
• Two built-in cooling fans
• Fully compatible with MS-DOS, Windows 3.11/95/98/NT, OS/2 Warp
• Dimensions: 8.4" (D) x 5.8" (W) x 1.6" (H)
Aluminum Mobile Rack 3-3