Table of Contents
Advertisement
Displaying the Settings Screen
You can enter the Settings menu by pressing and holding the MAIN and
ENT button for three seconds. The MX-890 will timeout after it is idle for
30 seconds and return to the previous setting or Main screen. There are
two pages of Settings screens. Select a setting by pressing a button on the
LCD screen. Press either of the PAGE buttons to access the other page. To
go back a step or to get out of the settings screen, press the MAIN button.
There are two pages of Settings screen. To access the other page, press
either of the PAGE buttons.
Page buttons reveal the
rest of the settings.
MX-890 C
LCD S
OLOR
Page 1 of the Settings
Screen
Page 4
CREEN
Page 2 of the Settings
Screen
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MX-890 and is the answer not in the manual?
Questions and answers
MX-890 remote works intermittently when NOT in the cradle. I need to put it in the cradle to get it to work after removing it and placing it back into the cradle a few times. Battery has been replaced. Reads full power.
The MX-890 may work intermittently when not in the cradle due to a low battery. Ensure the remote is fully charged by placing it in the charging base until the status light turns blue. If issues persist, try resetting the remote by pressing the reset button within the battery compartment.
This answer is automatically generated
The light on the screen is just white with some gray out boxes. I don’t know how to reset and I’m afraid I will lose the programmed items in the remote.
cannot locate reset button in the battery compartment