Table of Contents
Advertisement
MX-890 C
LCD S
OLOR
CREEN
Sound
Adjust the button beep level to Off or Loudest by
pressing the left or right hard buttons.
Pickup Settings
You can set your MX-890 to turn on when
picked up. Adjust the Pickup Sensor by pressing the
associated hard button adjacent to the ON or OFF
check box.
Factory Default
WARNING! Only use this button when instructed
to by Technical Support. It resets the memory of
the MX-890 to the factory condition. All your
programming will be lost! Press and hold the Erase
button to return the remote to its factory condition.
Exit
When you have finished adjusting Settings, simply tap the Exit button to
return to normal operation.
Page 7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MX-890 and is the answer not in the manual?
Questions and answers
MX-890 remote works intermittently when NOT in the cradle. I need to put it in the cradle to get it to work after removing it and placing it back into the cradle a few times. Battery has been replaced. Reads full power.
The MX-890 may work intermittently when not in the cradle due to a low battery. Ensure the remote is fully charged by placing it in the charging base until the status light turns blue. If issues persist, try resetting the remote by pressing the reset button within the battery compartment.
This answer is automatically generated
The light on the screen is just white with some gray out boxes. I don’t know how to reset and I’m afraid I will lose the programmed items in the remote.
cannot locate reset button in the battery compartment