Advertisement
Quick Links
Advertisement
Related Manuals for Universal Remote Control POWERBLASTER MRF100B
Summary of Contents for Universal Remote Control POWERBLASTER MRF100B
- Page 1 MRF100B...
- Page 2 THIS MANUAL. The information in this manual may be subject to change without prior notice. MASTERCONTROL, PowerBlaster, MacroPower, and SimpleSound are trademarks of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.
- Page 3 Here’s How PowerBlaster ™ Works: 1. RF series remote controls (RF10, RF20, RF30) send RF (Radio Frequency) signals to PowerBlaster RF receiver. 2. PowerBlaster converts RF signals to IR (Infrared) ™ , which is an commands and sends them out to components in the same cabinet space via the built-in front blaster.
-
Page 4: The Mounting Plate
Parts Guide Quantity Description PowerBlaster™ Receiver with integrated antenna Mounting Plate for wall mounting PowerBlaster™ Screws for wall mounting the mounting plate 9V-300mA Power Supply Flashers with 10 foot plug-in cables. Red Power LED lights to indicate when PowerBlaster is ™... - Page 5 Integrated antenna swings in any direction to optimize RF reception and range. Six flasher jacks on the rear of PowerBlaster™ connect flashers for control of A/V components out-of-sight of the front blaster. Six plug-in flashers are supplied with 10 foot cables and six extra self-adhesive pads (in case a flasher has to be repositioned).
- Page 7 MRF100B MRF100B...
- Page 13 MRF100B...