Table of Contents
Advertisement
8
The "Serial Port Settings" screen appears. Configure the settings of the
Serial port and click the [Next] button. Proceed to Step 10.
Setting
Printer name
COM Port
Baud Rate
Data Bits
Stop Bits
Flow Control
Parity
9
The "Ethernet Settings" screen appears. Configure the IP Address of the
TM printer and click the [Next] button. Proceed to Step 10.
Setting
Printer name
IP address
10
The display returns to the "Printer Configuration" screen. All the printer
drivers, configured between Step 6 to Step 9, appear in the list.
To install multiple printer drivers, repeat Step 5 to Step 9. To install the
same printer driver multiple times, click the [Copy] button.
When the settings of the printer drivers are finished, click the [Next]
button.
11
The "Start Copying Files" screen appears. Confirm the printer driver to
be installed which is displayed in "Current Settings" and then click the
[Next] button.
12
The printer driver added in the list at Step 10 is installed.
13
The "Maintenance Complete" screen appears. When you click the
[Finish] button, the process of installing the printer driver ends.
The printer name you entered at Step 6 is displayed. This cannot be
changed.
Specify the number of serial port used for connecting the printer.
Specify the baud rate.
Specify the data bits.
Specify the stop bits.
Specify the method of data flow between the computer and the printer.
Specify the parity.
The printer name you entered at Step 6 is displayed. This cannot be
changed.
Enter the printer IP address.
To find the information about IP Address of the TM printer, see the
Technical Reference Guide of each TM printer.
Chapter 2 Installation and Setup
Description
Description
2
57
Advertisement
Table of Contents
