Table of Contents
Advertisement
4
The "Local Port Support" screen appears. Select the port driver to be
installed and then click the [Next] button. For Serial or Ethernet interface,
do not select any printer driver and click [Next] button.
Automatically install detected USB devices.
Launch StatusViewer on login.
(TM-C100 is needed)
5
The "Printer Configuration" screen appears. When installing the printer
driver as well as the APD, click the [Add] button.
6
The Add Printer screen appears. Configure the printer driver and port to
use, and click the [Next] button.
Setting
Select driver
Printer name
Communication
Set as Default Printer
7
The "Parallel Port Settings" screen appears. Configure the settings of the
Parallel port and click the [Next] button. Proceed to Step 10.
Setting
Printer name
LPT Port
56
Item
Select the printer driver to be installed.
The printer driver name. This is changeable.
Do not use Unicode/2-byte characters for the name.
Select the type of interface to connect the computer and printer.
Create a Parallel port:
Create a Serial port:
Create an Ethernet port:
Create a USB port:
Check when configuring the printer as that normally used from the
Windows applications.
The printer name you entered at Step 6 is displayed. This cannot be
changed.
Specify the number of parallel port used for connecting the printer.
Usually, the port number is automatically displayed and no setting is
required.
Description
When this is checked, the Plug and Play function will
be enabled for the TM printer equipped with the USB
interface. If this is not checked, the printer driver
cannot be installed by the Plug and Play function.
W h e n t h i s i s c h e c k e d , t h e S t a t u s V i e w e r
automatically starts to run when you login the
computer.
Description
Proceed to Step 7.
Proceed to Step 8
Proceed to Step 9.
Proceed to Step 10.
Description
Advertisement
Table of Contents
