Follow the procedure below.
1
Double click the [APD] icon and start the installation.
2
The Install ShieldWizard screen appears. Click the [Next] button.
3
The "License Agreement screen" appears. Read the content and select
"I accept the terms of the license agreement". Then click the [Next]
button.
4
The "Setup Type" screen appears. Select "Standard", then click the
[Next] button.
5
The "Printer Configuration" screen appears. Click the [Add] button.
6
The "Add Printer" screen appears. Select a printer driver and port to be
used for the Customer Display, and click the [Next] button.
Setting
Select driver
Printer name
Port Type
Set as Default Printer
Select the printer driver for the Customer Display.
The name of the driver for the Customer Display.
Do not use Unicode/2-byte characters for the name.
Select an interface to use for connecting the Customer Display.
Select "Create a Serial port".
Check when configuring the printer as that normally used from the
Windows applications.
Chapter 2 Installation and Setup
Description
2
33