Epson M00002112 Install Manual page 38

7
The "Serial Port Settings" screen appears. Configure the settings of the
Serial port and click the [Next] button.
Setting
Printer name
COM Port
Baud Rate
Data Bits
Stop Bits
Flow Control
Parity
8
The display returns to the "Printer Configuration" screen. Click the [Add]
button to add a printer driver for the Customer Display.
9
The "Add Printer" screen appears. First select a printer driver to use for
the Customer Display. Then, select the Port Type setting same as that for
the TM printer made at Step 6 to 7 (example: "Connect to EPSON TM-
H6000III Receipt"), and click the [Next] button.
Setting
Select driver
Printer name
Port Type
Set as Default Printer
8>
38
The printer name you entered at Step 6 is displayed. This cannot be
changed.
Specify the number of serial port used for connecting the printer.
Specify the baud rate.
Specify the data bits.
Specify the stop bits.
Specify the method of data flow between the computer and the printer.
Specify the parity.
Select the printer driver for the Customer Display.
The name of the driver for the Customer Display.
Do not use Unicode/2-byte characters for the name.
Select an interface to use for connecting the Customer Display.
Select the printer driver for the Customer Display.
Description
Description
9>