Epson M00002112 Install Manual page 46

6
The "Local port support" screen appears. Select the port driver to be
installed and then click the [Next] button. For Serial or Ethernet interface,
do not select any printer driver and click [Next] button.
Automatically install detected USB devices.
Launch StatusViewer on login.
(TM-C100 is needed)
7
The "Printer Configuration" screen appears. When installing the printer
driver as well as the APD, click the [Add] button.
8
The "Add Printer" screen appears. Configure the printer driver and port
to use, and click the [Next] button.
Setting
Select driver
Printer name
Port Type
Set as Default Printer
46
Item
Select the printer driver to be installed.
The printer driver name. This is changeable.
Do not use Unicode/2-byte characters for the name.
Select the type of interface to connect the computer and printer.
Create a Parallel port:
Create a Serial port:
Create an Ethernet port:
Create a USB port:
Check when configuring the printer as that normally used from the
Windows applications.
Description
When this is checked, the Plug and Play function will
be enabled for the TM printer equipped with the USB
interface. If this is not checked, the printer driver
cannot be installed by the Plug and Play function.
When this is checked, the Status Viewer
automatically starts to run when you login the
computer.
Description
Proceed to Step 9.
Proceed to Step 10.
Proceed to Step 11.
Proceed to Step 12.