Table of Contents
Advertisement
7 Specifications
Environmental specifications
Specification
Temperature range
Operating
Storage
Relative humidity
Operating
Storage
Altitude
Operating
Non-operating
Temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to
3048 m (10,000 ft) is applicable. No direct sunlight allowed. The upper limit may be limited by the type and
number of options installed.
Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum
for storage corresponds to a pressure minimum of 70 KPa.
‡ Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Storage blade specifications
Specification
Height
Value
10º C to 35º C (50º F to 95º F) Maximum rate of change is 10º
C/hr (50º F/hr)
-30°C to 60°C (-22°F to 140°F) Maximum rate of change is 20º
C/hr (68º F/hr)
10% to 90% relative humidity (Rh), 28º C (82.4º F) maximum
wet bulb temperature, non-condensing
5% to 95% relative humidity (Rh), 38.7º C (101.66º F) maximum
wet bulb temperature, non-condensing.
3048 m (10,000 ft) This value may be limited by the type and
number of options installed.
9144 m (30, 000 ft)
Value
5.56 cm (2.19 in)
HP StorageWorks SB40c Storage Blade
35
Advertisement
Table of Contents
