Related Manuals for Turbosound TCS-1061 Quickstart and rigging
Summary of Contents for Turbosound TCS-1061 Quickstart and rigging
- Page 1 TCS-1061 Quickstart and Rigging User Guide (Please refer to www.turbosound.com for the latest updates) Version 1.0...
- Page 2 Quick Start Guide TCS series The Flying Systems FK-1061 Flying kit FB-1061 Flying grid (up to 5 cabinets deep) (up to 16 cabinets deep) TCS series Quickstart Guide v1.0 - Page - 2...
-
Page 3: Safety Information
Turbosound rigging with other types or brands of loudspeakers. This practice may compromise safety standards and Turbosound will not be responsible for damage or injury so caused. Do not modify the rigging accessories, or use them in a way other than that described in this user manual. Rigging components supplied as part of a complete assembly are non-interchangeable and must not be exchanged with the component parts of any other assembly. -
Page 4: General Description
Quick Start Guide TCS series Flying system components have been individually tested in accordance with the following regulations: • The Health and Safety at Work Act 1974 • The Supply of Machinery (Safety) Regulations 1992 • The Lifting Operations and Lifting Equipment Regulations 1998 General Description To take full advantage of the extremely flexible properties of the TCS series loudspeaker, the rigging system is designed to be intuitive, inherently safe, flexible, and simple to use. - Page 5 Quick Start Guide TCS series FK-1061 FLYING SYSTEM WILL SUPPORT A COLUMN OF UP TO 5 CABINETS DEEP FK-1061 Flying Kit Enables suspension of one column of TCS-1061 cabinets up to 5 deep from a single flybar, and utilising an identical flybar fitted with pull-back links to provide a pull-back for the whole cluster.
- Page 6 Quick Start Guide TCS series FB-1061 FLYING SYSTEM WILL SUPPORT A COLUMN OF UP TO 16 CABINETS DEEP FB-1061 Flybar The FB-1061 is a fabricated steel frame consisting of welded box sections with front and rear cabinet attachment points and a central spine offering a total of nine pick up points to allow a range of cluster angles.
- Page 7 Quick Start Guide TCS series Tri-amp to bi-amp conversion The conversion is achieved by changing the position of a jumper on the crossover board located inside the left side driver access door (when viewed from the front). The default jumper position as shipped from the factory is TRI-AMP as shown here.
- Page 8 Quick Start Guide TCS series Turbosound Ltd, Star Road, Partridge Green, West Sussex RH13 8RY t: +44 (0)1403 711447 f: +44 (0)1403 710155 w: www.turbosound.com TCS series Quickstart Guide v1.0 - Page - 8...
Need help?
Do you have a question about the TCS-1061 Quickstart and rigging and is the answer not in the manual?
Questions and answers