Selecting a Font
You can select the printer's fonts, pitch, and size by using the
default-setting mode. See "Changing default settings" on page 47
for instructions on how to change the default settings.
Note:
❏ The available pitch or size depends on the font you select. See the
table below for more information.
Bitmap font
Font
Draft
Roman
Sans Serif
Courier
Prestige
Script
OCR-B
Orator
Orator-S
Script C
Scalable font
Font
Roman
Sans Serif
Roman T
Sans Serif H
❏ Settings you make in application programs usually override settings
you make in the default-setting mode. For best results, use your
application to select a font and make other settings.
40
Control Panel
Pitch
10, 12, 15
10, 12, 15, PS
10, 12, 15, PS
10, 12, 15
10, 12
10
10
10
10
Proportional
Size
10.5 pt, 8 pt to 32 pt (every 2 pt)
10.5 pt, 8 pt to 32 pt (every 2 pt)
10.5 pt, 8 pt to 32 pt (every 2 pt)
10.5 pt, 8 pt to 32 pt (every 2 pt)