Epson LQ 630S Reference Manual page 52

Character table
You can select from among 13 to 36 standard character tables,
depending on the country of purchase. See "Default-setting
mode" on page 41 for more information.
International character set for italic table
You can select among several international character sets for the
italic character table. Each character set contains eight characters
that vary depending on the country or language, so you can
customize the italic table to suit your printing needs.
Pitch
You can select the character pitch from 10 cpi, 12 cpi, 15 cpi, 17
cpi, 20 cpi or Proportional.
Font
You can select the following fonts: Draft, Roman, Sans Serif,
Courier, Prestige, Script, OCR-B, Orator, Orator-S, Script C,
Roman T, and Sans Serif H.
Manual feed wait time
This setting allows you to set the amount of wait time between
when paper is inserted into the paper guide and it is fed. If the
paper feeds before you can adjust its position properly, you
should increase the wait time.
Buzzer (beeper)
The printer beeps when an error occurs. See "Using the Error
Indicators" on page 52 for more information on printer errors. If
you do not want the printer to beep when an error occurs, turn
off this setting.
Multipart forms with cut-paper tab binding
When using multipart forms with cut-paper tab bindings that are
4 inches or wider but less than 9.4 inches wide, turn on this
setting.When this setting is on, the print head avoids the binding
area along the right and left edges of multipart forms during
paper feeding. This makes paper feeding easier and prevents
paper jams.
46
Control Panel