Brother MFC-8510DN Basic User's Manual page 164

Level 1 Level 2
7.Network 3.Wi-Fi Direct
(MFC-8710DW) (Continued)
(Continued)
(4.E-mail/
IFAX)
See Network User's Guide.
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/.
 The factory settings are shown in Bold with an asterisk.
 LDAP, Internet Fax and Scan to E-mail Server functions are available as a download.
 To use these functions, please download the necessary software from our web site, the Brother
Solutions Center at http://solutions.brother.com/.
 Level 2 menus inside parentheses appear if you download IFAX/E-mail options to your machine.
152
Level 3 Level 4
6.Status Info. 1.Status
2.Signal
7.I/F Enable —
—
1.Mail Address
2.Setup Server 1.SMTP
Level 5 Options
—
G/O Active(**)
Client Active
Not Connected
Off
Wired LAN Active
** = the number
of devices
—
Strong
Medium
Weak
None
—
On
Off*
— —
1.SMTP Server Name
(Up to 64
characters)
IP Address
[000-255].
[000-255].
[000-255].
[000-255]
2.SMTP Port 25*
[00001-65535]
3.Auth. for SMTP None*
SMTP-AUTH
POP bef.SMTP
Descriptions Page
You can see the
See .
current Wi-Fi
Direct™ network
status.
You can see the
current Wi-Fi
Direct™ network
signal strength.
When your
machine acts as
Group Owner, the
LCD always shows
Strong.
Enable or Disable
the Wi-Fi Direct™
connection.
Enter the E-mail
See .
address. (Up to 60
characters)
Enter the SMTP
server address.
Enter the SMTP
port number.
Selects the
Security method
for E-mail
notification.