Brother MFC-8510DN Basic User's Manual page 162

Level 1 Level 2
7.Network 2.WLAN
(MFC-8710DW) (Continued)
(Continued)
See Network User's Guide.
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/.
 The factory settings are shown in Bold with an asterisk.
 LDAP, Internet Fax and Scan to E-mail Server functions are available as a download.
 To use these functions, please download the necessary software from our web site, the Brother
Solutions Center at http://solutions.brother.com/.
Level 2 menus inside parentheses appear if you download IFAX/E-mail options to your machine.

150
Level 3 Level 4
1.TCP/IP 0.IPv6
(Continued)
—
2.Setup Wizard
3.WPS/AOSS —
4.WPS w/PIN Code —
5.WLAN Status 1.Status
2.Signal
3.SSID
4.Comm. Mode —
Level 5 Options
—
On
Off*
— —
— —
— —
—
Active(11n)
Active(11b)
Active(11g)
Wired LAN Active
WLAN OFF
AOSS Active
Connection Fail
—
Strong
Medium
Weak
None
— —
Ad-hoc
Infrastructure
Descriptions Page
Enable or Disable
See .
the IPv6 protocol. If
you want to use the
IPv6 protocol, visit
http://solutions.
brother.com/ for
more information.
You can configure
your internal print
server.
You can easily
configure your
wireless network
settings using the
one-button push
method.
You can easily
configure your
wireless network
settings using
WPS with a PIN
code.
You can see the
current wireless
network status.
You can see the
current wireless
network signal
strength.
You can see the
current SSID.
You can see the
current
Communication
Mode.