Brother MFC-8510DN Basic User's Manual page 125

Network difficulties (continued)
Difficulties
Cannot connect to wireless
network. (MFC-8710DW and
MFC-8910DW)
Other difficulties
Difficulties
The machine will not turn on.
The machine cannot print EPS data
that includes binary with the
BR-Script3 printer driver.
The machine beeps when you try to
access the Setup Receive and
Setup Send menus.
1 ®
For Windows 7 and Windows Server
necessary
Suggestions
Investigate the problem using the WLAN Report. Press Menu, 6, 7. and then
press Start.
See Quick Setup Guide.
Suggestions
Adverse conditions on the power connection (such as lightning or a power surge)
may have triggered the machine's internal safety mechanisms. Turn the machine
off and unplug the power cord. Wait for ten minutes, then plug in the power cord
and turn the machine on.
If the problem is not solved, turn off the machine. If you are using a backup battery
or surge suppressor device, disconnect it to make sure it is not the problem. Plug
the machine's power cord directly into a different known working wall outlet and
turn on the machine.
®
(Windows )
You need the following settings to print EPS data:
a
®
For Windows 7 and Windows Server
Click the (Start) button and Devices and Printers.
®
For Windows Vista
Click the (Start) button, Control Panel, Hardware and Sound, and
then Printers.
®
For Windows XP and Windows Server
Click the Start button, and select Printers and Faxes.
b
Right-click the Brother MFC-XXXX BR-Script3 icon and select
1
Properties .
c
From the Device Settings tab, choose TBCP (Tagged binary
communication protocol) in Output Protocol.
(Macintosh)
If your machine is connected to a computer with a USB interface, you cannot print
EPS data that includes binary. You can print the EPS data at the machine through
a network. For installing BR-Script3 printer driver through the network, visit the
Brother Solutions Center at http://solutions.brother.com/.
If FAX is not illuminated, press it to turn on FAX mode. The Setup Receive
settings (Menu, 2, 1) and Setup Send settings (Menu, 2, 2) are available only
when the machine is in FAX mode.
®
2008 R2: Printer properties, and Brother MFC-XXXX BR-Script3 if
®
2008 R2:
®
and Windows Server 2008:
®
2003:
Troubleshooting
B
113