Cotton Stand - Brother SL-1110 Instruction Manual

5. INSTALLATION
7
3842M
3843M
3844M
SL-1110
7. Insert the cover (9) of belt cover D
(7) in between the belt cover (2)
and belt cover D (7), and then place
it into the groove of belt cover D (7).
8. Slide the cover (9) down along the
groove of belt cover D (7) as far as
it will go.
9. Pull belt cover D (7) toward you
until there is no clearance between
the belt cover (2) and the cover (9)
of belt cover D (7).
10. Fully tighten the two screws (8).
(Refer to step 6.)

9. Cotton stand

(1) Cotton stand
NOTE:
Securely tighten the nut (4) so that
the two rubber cushions (2) and the
washer (3) are securely clamped and
so that the cotton stand (1) does not
move.