Control Panel; Application Software - Epson EPL-7500 Manual

Default settings in PostScript mode
Item
Factory Reset
Paper input
Standard paper cassette
Paper size Letter or A4
Top margin
0.16 inches
Left margin 0.16 inches
Right margin 0.16 inches
Bottom margin 0.16 Inches

Application Software

PostScript mode
Check to see that the SOFTWARE option in SelecType Level 1 is
set to PostScript. If not, follow the steps described in Chapter
change the printer mode with SelecType.
For PC users: Choose EPL-7500 from the printer selection menu in
your application program. If the menu does not list the EPL-7500,
choose any PostScript printer.
For Macintosh users: Check your Macintosh documentation for
instructions on installing a printer. If the EPL-7500 is
among the printer options, choose the LaserWriter".
HP emulation mode
If your application program doesn't support the PostScript
language, or if you are using a program written specifically for the
HP LaserJet, use the SelecType Level 1 SOFTWARE option to set
your printer to HP emulation mode.
available from the list below from your application program's
printer selection menu.
HP LaserJet series llTM
HP LaserJet I'lusTM
HP LaserJet 500TM
H P LaserJetTM
If none of these printers are listed among your program's options,
select any printer that
uses
(PCL).
Printing a test file
After you install the software, create and print a test file using the
fonts, symbols, features and formats that you use most often.
Printing the test file shows
your application program.
Laser Printers
Reset
SelecType setting
SelecType setting
0.16 inches
0.16 inches
0.16 inches
0.16 Inches
not
choose the first printer
Then
the HP Printer Command Language
you how the EPL-7500 works

Control Panel

The printer control panel is made up of three elements: buttons,
indicator lights, and a liquid crystal display. You use the buttons
to select printer settings and functions, and the indicator lights and
display let you monitor the current status of the printer.
Display
I
I
I
S e l e c T y p e
The following menu maps show the possible menus and
options available in SelecType mode. An
the factory setting. See Chapter 3 for a description of each
option.
S e l e c T y p e L e v e l 1
3 to
listed
with
Note: The
PAPERSIZE OPT TRAY depend on the country.
1/7/91
EPL-7500 LASER PRINTER
of PAPERSIZE STD TRAY and
factory settings
asterisk (*) Indicates
EPL-7500-5