Installing The Hard Disk Drive - Gigabyte GS-R12T4H2-RH Service Manual

GS-R12T4H2-RH Rack Mount Server

Installing the Hard Disk Drive

Step 1 Press the release button.
Step 2 Pull the locking lever to remove the HDD tray.
Step 3 Slide hard disk into blank.
Step 4 Secure the hard drive to the tray with four (4) screws as shown. Do not over tighten the
screws. Slide the blank into the bay until it locks into place.
Step 5 Engage the HDD Security Lock. For detail instruction, please see the following section.
Step 6 Connect cable and power.
1
2
3
4
4
2 1