Table of Contents
Advertisement
Auto: Set parameters automatically. (Default setting)
CD-ROM: Use for ATAPI CD-ROM drives or double click [Auto] to set all HDD parameters
automatically.
ATAPI Removable: Removable disk drive is installed here.
Multi-Sector Transfer
This field displays the information of Multi-Sector Transfer Mode.
Disabled: The data transfer from and to the device occurs one sector at a time.
Auto: The data transfer from and to the device occurs multiple sectors at a time if the device
supports it.
LBA Mode Control This field shows if the device type in the specific IDE channel
32-Bit I/O
Transfer Mode
Ultra DMA Mode
support LBA Mode.
Enable this function to max imize the IDE data transfer rate.
This field shows the information of Teansfer Mode.
This filed displays the DMA mode of the device in the specific IDE
channel.
6 4
BIOS Setup
Advertisement
Table of Contents
