Disassembly - Golden Technologies Companion I GC240 Owner's Manual

Companion Owner's Manual: GC240, GC340, GC440
1. REMOVING THE SEAT
NOTE: Pinchless seat hinges are
standard on all Golden Companion
scooters.
1. Remove the key.
2. Make sure that the scooter brake is en-
gaged.
3. Loosen the adjustment knobs. Slide the
arms off the scooter if you are not able to
carry the seat with the weight of the arm-
rests attached. See figure 5.
4. Remove the seat by pulling up and hold-
ing the seat lever and lifting the seat
straight up and out of the seat post. See
figure 14.
5. The seat can be folded for compact
storing.
2. REMOVING THE REAR SHROUD
1. Pull up on the sides of the shroud.
2. Lift the shroud up and off the scooter. See
figure 15.
3.
REMOVING THE BATTERIES
1. After removing the shroud, loosen the
Velcro™ straps from around each battery.
See figure 16.
Companion
VII. DISASSEMBLY
FIGURE 14.
FIGURE 15.
VELCRO™ STRAPS
FIGURE 16.
22