Golden Technologies Companion I GC240 Owner's Manual page 23

Hide thumbs Also See for Companion I GC240:
Table of Contents

Advertisement

Companion Owner's Manual: GC240, GC340, GC440
FIGURE 17. BATTERY CONNECTORS
VELCRO™ STRAPS
FIGURE 18. PULL T-HANDLE
FIGURE 19. COMPLETELY DISASSEMBLED
Companion
VII. DISASSEMBLY
2. Squeeze the locking ear on the connector
and disconnect the batteries from the
frame. See Figure 17.
3. Remove the batteries one at a time.
4. Lower the tiller, which will automatically
lock into place once lowered.
5. Wrap the V straps around the Delta tiller
to help secure it. See figure 18.
NOTE: The key must be removed from the
key switch to fully lower the tiller. The tiller
will only lock when it is in the center posi-
tion.
4. DISCONNECT THE FRONT AND REAR
FRAME SECTIONS.
1. Pull up on the T handle next to the seat
post See figure 18. Pulling up on the T
handle will separate the front and rear
section.
2. Your Companion scooter is now fully dis-
assembled. See figure 19.
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Companion ii gc340Companion ii gc440

Table of Contents