S
KP-44PS2U
®
Thank you for purchasing this Sony product.
After following this step by step guide you
will be able to:
Insert Batteries into the Remote Control.
Connect the Aerial and VCR to your TV.
Select the language of the menu screens.
Select the country in which you wish to
operate the set.
Automatically Tuning the TV.
Change the broadcast channels into a
different order.
View TV Programmes.
100 Hz
Projection TV
©2001 by Sony Corporation
Ecological Paper - Totally Chlorine Free
Checking the
Accessories Supplied
One Remote
Control (RM-903)
Inserting Batteries into
the Remote Control
4-083-743-01 (1)
Printed in Spain
1
Two batteries
(R6 type)
2
Connecting the Aerial
and VCR
Connecting cables are not supplied.
or
The Scart lead is optional.
If you use this optional connection it can improve picture and sound
quality when using a VCR.
If you do not use a SCART lead, after automatically tuning the set refer
to the "Manually Tuning the TV" section of the instruction manual, to
tune in the set to the output of your VCR. Also refer to your VCR
instruction manual to find out how to find the output channel of your
VCR.
Switching on the set
Connect the set plug
to the mains socket
(220-240V AC, 50Hz).
The first time the set is connected,
it is usually turned on. If the TV
is off push in the
switch on the front of the set.
3
OUT
IN
4
On/Off