Using Bravia Theatre Sync; With Control For Hdmi - Sony BRAVIA KDL-26M4000 Operating Instructions Manual

Using BRAVIA Theatre Sync
TM
with Control for HDMI
This TV is equipped with BRAVIA Theatre
Sync
TM.
The Control for HDMI function enables
BRAVIA Theatre Sync to allow communication
between Sony TV's and Sony equipment. Only
Sony equipment with Control for HDMI
capability is supported.
When you connect a Sony A/V receiver with
BRAVIA Theatre Sync function to your TV, the
following additional operation is possible:
• THEATER
• By pressing _ on the remote control, it turns on
and searches for an external audio system that supports
BRAVIA Theatre Sync. When the Theatre Sync audio
system is on, the internal speakers of the TV will turn
off and the
Picture Mode
will change automatically
to Cinema.
To connect Sony equipment with Control
for HDMI
Use an HDMI cable that bears the HDMI logo for
connection. See pages 14 to 17 or see the HDMI
connection shown in the Quick Setup Guide
provided with the TV documentation.
Setting the Control for HDMI
In order for the function of Control for HDMI to
operate, the TV and other Sony equipment with
Control for HDMI function must be setup (see
page 38). For other equipment, refer to the
operating instruction for that equipment.
Control for HDMI available with your TV
The following operations are available after you
connect the Sony equipment with
Control for
HDMI function to your TV:
• Automatically turn off the connected equipment when
you turn off the TV.
• The TV will automatically mrn on and runes to the
respective HDMI input when the connected equipment
is turned on by One-Touch-Play.
• Equipment listed under External Inputs will mrn on
automatically when selected.
19