Installing The Wall-Mount Bracket - Sony BRAVIA KDL-26M4000 Operating Instructions Manual

Follow the simple steps below to remove the Table-
Top Stand:
1 Disconnect all the cables fiom the TV.
2 Remove the 3 screws fiom behind the TV as
indicated below. Do not remove any other
screws from the TV.
3 Gently lay the TV (face down) onto a level and
stable surface covered with a thick and soft
cloth.
4 Secure the Mounting Hooks to the rear of the
TV. For more details refer to Install the Wall-
Mount Bracket and also the Instruction
Guide provided by the Wall-Mount Bracket
model for your TV.
• If an electric screwdriver is used, set the torque to
tighten at approximately 1.5 N'm {15Kgf'em}.
To Customers
Your KDL-26M4000/KDL-32M4000/
KDL-37M4000/KDL-40M4000 can be _"
wall-mounted using a Wall-Mount Bracket (sold t_
separately). See table on page 8 showing the Wall-
Mount Bracket model appropriate for your TV.
For product protection and safety, Sony strongly
recommends that you use the Wall-Mount
Bracket designed for your TV and wall-
mounting is performed by a Sony dealer or a
licensed contractor. Do not attempt to install it
yourself. Sony is not liable for any damage or
injury caused by mishandling or improper
installation.
Please provide this installation information as well
as the instruction supplied in the Wall-Mount
Bracket package to your installer
To Sony Dealers and Licensed Contractors
To avoid injury and property damage, read these
instructions carefully. Periodic inspection and
maintenance is highly recommended to ensure that
TV is securely mounted.
Installing the Wall-Mount Bracket and
Mounting
Hooks
1
Open the Wall-Mount Bracket package and
check for all the required parts including the
instruction.
2 See Installation dimensions table to determine
the best location for wall-mounting. The wall
must be strong enough to support at least four
times the weight of the TV. Also refer to the
instruction provided with your Wall-Mount
Bracket.
(Continued)
9