Tv Controls/Indicators - Sony BRAVIA KDL-26M4000 Operating Instructions Manual

TV Controls/Indicators
[]
MENU
Press to display the menu with TV functions and settings (see "Using TV Menus" on
page 27).
[] [_ Press to display
the External Inputs
list, toggle through the list and select your desired
INPUT
input.
In the menu screen, this button serves as confirming the selection or setting.
[] _,,_ Press to adjust the volume. In the menu screen, these buttons serve as left/right buttons.
- VOLUME +
[] _"t Press to scan through chalmels. In the melm screen, these buttons serve as up/down buttons.
- CHANNEL +
[] TIMER/PIC OFF Lights up in amber when the timer is set. When the timer is set, this LED will remain lit even
LED
if the TV is turned off. For details, see page 38. If the LED blinks in red continuously, this
may indicate the TV needs servicing (see contacting Sony int_rmation on the back cover).
Lights up in green when the Backlight featnre is activated (see page 31).
[] STANDBY LED Light up in red when your TV is in PC standby mode.
[] POWER LED Lights up in green when the TV is turned on.
[] (IR) Infrared Receives IR signals from the remote control.
Receiver
Light Sensor
Senses room light level mad adjusts the screen brightness accordingly (see page 30 for details).
Do not put anything near the sensor, as its function may be affected.
Z:J
• Make sure that the TV is turned off before unplugging the power cord. Unplugging the power cord while the TV is
turned on may cause the POWER LED to remain lit l\w up to 20 seconds or may cause the TV to malflmction.
o
II.
"1
7,
25