Table of Contents
Advertisement
Exploring Fun Features
Using BRAVIA Theatre
Sync™ with Control for
HDMI
This TV is equipped with BRAVIA Theatre
Sync™. The Control for HDMI function
enables BRAVIA Theatre Sync to allow
communication between a Sony TV and Sony
equipment. Only Sony equipment with
Control for HDMI capability is supported.
How to connect Sony equipment with
Control for HDMI
Use an HDMI cable that bears the HDMI logo
for connection. See pages 16 to 19 or see the
HDMI connection shown in the Quick Setup
Guide included with the TV documentation.
Setting the Control for HDMI
In order for the Control for HDMI to operate,
you must set up the TV and other Sony
equipment with Control for HDMI function
(see page 39). For other equipment, refer to the
operating instructions for that equipment.
Control for HDMI available with your TV
The following operations are available once you
connect the Sony equipment with Control for
HDMI function to your TV:
• Automatically turn off connected equipment
when you turn off the TV.
• The TV will automatically turn on and tune to
the respective HDMI input when the
connected equipment is turned on by
One-Touch-Play.
• Equipment listed under External Inputs
will turn on automatically when selected.
When connecting a Sony A/V receiver with the
BRAVIA Theatre Sync function to your TV, the
following operations are possible:
• Pressing
on the remote control turns on
and searches for an external audio system that
supports BRAVIA Theatre Sync. When the
BRAVIA Theatre Sync audio system is on,
the internal speakers of the TV will turn off
and the Picture Mode will change
automatically to Cinema.
~
• When using BRAVIA Theatre Sync or other
BRAVIA Sync features with other equipment,
some buttons in the remote control of the TV may
be used to control over such devices. If the device
does not support the BRAVIA Theatre Sync
feature, some buttons will remain without
function.
21
Hide quick links:
Advertisement
Table of Contents
