Using Bravia Theatre Sync; With Control For Hdmi - Sony BRAVIA KDL-40SL140 Operating Instructions Manual

Using BRAVIA Theatre
Sync TM
with Control for HDMI
This TV is equipped with BRAVIA Theatre
Sync
TM.
The Control for HDMI function enables
BRAVIA Theatre Sync to allow communication
between Sony TV's and Sony equipment. Only
Sony equipment with Control for HDMI
capability is supported.
To connect Sony equipment with Control
for HDMI
Use an HDMI cable that bears the HDMI logo for
connection. See pages 14 to 17 or see the HDMI
connection shown in the Quick Setup Guide
provided with the TV documentation.
Setting the Control for HDMI
In order for the function of Control for HDMI to
operate, the TV and other Sony equipment with
Control for HDMI function must be setup (see
page 39). For other equipment, refer to the
operating instruction for that equipment.
Control for HDMI available with your TV
The following operations are available after you
connect the Sony equipment with Control for
HDMI function to your TV:
• Automatically turn off the connected equipment when
you turn off the TV.
• The TV will automatically turn on and tunes to the
respective HDMI input when the connected equipment
is turned on by One-Touch-Play.
• Equipment listed under External Inputs will turn on
automatically
when selected.
When connecting a Sony A/V receiver with the
BRAVIA Theatre Sync function to your TV, the
following operation is possible:
THEATER
• Pressing CZB on the remote control turns on and
searches for an external audio system that supports
BRAVIA Theatre Sync. When the Theatre Sync audio
system is on, the internal speakers of the TV will turn
off and the
Picture Mode
will change automatically
to Cinema.
• When using BRAVIA Theatre Sync or other BRAVIA
Sync features, the included remote control will change
some of the buttons functions to accommodate control
over the device. If the device does not support this
feature, some buttons will remain without function.
19