Sony KDL-26ML130 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. LCD TV
  5. KDL-26ML130 - 26" Bravia M-series Digital Lcd...
  6. Service manual
Sony KDL-26ML130 Service Manual

Sony KDL-26ML130 Service Manual

Lcd digital color television
Hide thumbs Also See for KDL-26ML130:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual , Installation Manual
HISTORY INFORMATION FOR THE FOLLOWING MANUAL:

SERVICE MANUAL

MODEL NAME
KDL-26M3000
KDL-26M3000
KDL-26ML130
KDL-32M3000
KDL-32M3000
KDL-32ML130
ORIGINAL MANUAL ISSUE DATE: 7/2007
:UPDATED ITEM
REVISION DATE
7/2007
9/2007
9-883-757-02
REMOTE COMMANDER
RM-YD021
RM-YD021
RM-YD021
RM-YD021
RM-YD021
RM-YD021
SUBJECT
No revisions or updates are applicable at this time.
PC Audio Input specifi cation updated. Replaced Page 4.
Added Battery Cover PN for Remote Commander. Replaced Page 93.
DESTINATION
US/CANADA
LATIN NORTH/LATIN SOUTH
US/CANADA
US/CANADA
LATIN NORTH/LATIN SOUTH
US/CANADA
LCD DIGITAL COLOR TELEVISION
MA1
CHASSIS

Advertisement

Table of Contents
loading

Related Manuals for Sony KDL-26ML130

Summary of Contents for Sony KDL-26ML130

  • Page 1: Service Manual

    HISTORY INFORMATION FOR THE FOLLOWING MANUAL: SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION KDL-26M3000 RM-YD021 US/CANADA KDL-26M3000 RM-YD021 LATIN NORTH/LATIN SOUTH KDL-26ML130 RM-YD021 US/CANADA KDL-32M3000 RM-YD021 US/CANADA KDL-32M3000 RM-YD021 LATIN NORTH/LATIN SOUTH KDL-32ML130 RM-YD021 US/CANADA ORIGINAL MANUAL ISSUE DATE: 7/2007...
  • Page 2 Self Diagnosis Supported model SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION KDL-26M3000 RM-YD021 US/CANADA KDL-26M3000 RM-YD021 LATIN NORTH/LATIN SOUTH KDL-26ML130 RM-YD021 US/CANADA KDL-32M3000 RM-YD021 US/CANADA KDL-32M3000 RM-YD021 LATIN NORTH/LATIN SOUTH KDL-32ML130 RM-YD021 US/CANADA KDL-32M3000 RM-YD021 LCD DIGITAL COLOR TELEVISION...

  • Page 3: Table Of Contents

    KDL-26M3000/26ML130/32M3000/32ML130 TABLE OF CONTENTS SECTION TITLE PAGE SECTION TITLE PAGE Specifi cations ................. 4 3-5. Schematics and Supporting Information ......44 BM Board Schematic Diagram (1 of 12) ......44 Warnings and Cautions ..............6 BM Board Schematic Diagram (2 of 12) ......45 Safety-Related Component Warning ..........

  • Page 4: Specifi Cations

    HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Blu-ray is a trademark. “BRAVIA” and , and PS3 are trademarks or registered marks of Sony Corporation. Design and specifi cations are subject to change without notice. KDL-26M3000/26ML130/32M3000/32ML130...
  • Page 5 KDL-26M3000/26ML130/32M3000/32ML130 KDL-26M3000 KDL-26ML130 KDL-32M3000 KDL-32ML130 Power Consumption in use 135W 170W in standby Less than 1W Speaker Output (W) 10W + 10W 146 x 35 mm Dimensions (W x H x D) with stand 662 x 515 x 214 mm...

  • Page 6: Warnings And Cautions

    Les composants identifi es par une trame et par une marque ! sur les schemas de principe, les vues explosees et les listes de pieces sont d’une importance critique pour la securite du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony.

  • Page 7: Safety-Related Component Warning

    KDL-26M3000/26ML130/32M3000/32ML130 SAFETY-RELATED COMPONENT WARNING There are critical components used in LCD color TVs that are important for safety. These components are identifi ed with shading and mark on the schematic diagrams and the electrical parts list. It is essential that these critical parts be replaced only with the part number specifi...
  • Page 8 Due to the higher melting point of Lead Free Solder the soldering iron tip temperature needs to be set to 370 degrees centigrade. This requires soldering equipment capable of accurate temperature control coupled with a good heat recovery characteristics. For more information on the use of Lead Free Solder, please refer to http://www.sony-training.com KDL-26M3000/26ML130/32M3000/32ML130...

  • Page 9: Safety Check-Out

    KDL-26M3000/26ML130/32M3000/32ML130 SAFETY CHECK-OUT The AC leakage from any exposed metal part to earth ground and After correcting the original service problem, perform the following from all exposed metal parts to any exposed metal part having a safety checks before releasing the set to the customer: return to chassis, must not exceed 0.5 mA (500 microamperes).

  • Page 10: Self-Diagnostic Function

    KDL-26M3000/26ML130/32M3000/32ML130 Self Diagnosis SELF-DIAGNOSTIC FUNCTION Supported model The units in this manual contain a self-diagnostic function. If an error occurs, the TIMER LED indicator will automatically begin to fl ash. The number of times the LED fl ashes translates to a probable source of the problem. A defi nition of the TIMER LED fl ash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 11 KDL-26M3000/26ML130/32M3000/32ML130 Viewing the Self Check Diagnostic List 1. TV must be in standby mode. (Power off). 2. Press the following buttons on the Remote Commander within a second of each other: Channel 5 Volume + TV POWER . DISPLAY The Self Check list displays. This is the SAME as accessing Service Adjustments.

  • Page 12: Section 1: Disassembly

    KDL-26M3000/26ML130/32M3000/32ML130 SECTION 1: DISASSEMBLY 1-1. REAR COVER REMOVAL Remove 2 screws from Rear Cover arm positions, +PSW M5X16 Remove 2 screws from Terminals, +BVTP 3X12 TYPE2 TT(B) Remove 14 screws from Rear Cover, +BVTP2 4X16 Rear Cover Bezel 1-2. ARM, UNDER COVER AND STAND REMOVAL Remove 2 screws from bottom of VESA Arms, +PSW M5X16 Remove 3 screws from Under Cover and Stand, +BVTP2 4X16 (32”...

  • Page 13: Hm1 Board Removal

    KDL-26M3000/26ML130/32M3000/32ML130 1-3. HM1 BOARD REMOVAL Remove from bezel Disconnect one connector Release hooks and remove HM1 Board HM1 Board Multi Button Assembly Bezel 1-4. UM BOARD AND JACK HOLDER REMOVAL Remove one screw, +BVTP 3X12 TYPE2 TT(B) Disconnect 2 connectors Remove 2 screws, +BVTP 3X12 TYPE2 TT(B) UM Board Side Jack Holder...

  • Page 14: Speaker, Light Guide And Hm3 Board Removal

    KDL-26M3000/26ML130/32M3000/32ML130 1-5. SPEAKER, LIGHT GUIDE AND HM3 BOARD REMOVAL Slide out Speakers from Bezel Disconnect one connector Remove 2 screws, +BVTP 3X12 TYPE2 TT(B) Speakers HM3 Board Light Guide 1-6. BM BOARD REMOVAL Remove 4 screws, +BVST 3X8 Top Shield Remove 2 screws, +BVST 3X8 Remove 2 screws, HEX Remove 2 screws, +PSW M3X5...

  • Page 15: G1 Bracket And G1M Board Removal

    KDL-26M3000/26ML130/32M3000/32ML130 1-7. G1 BRACKET AND G1M BOARD REMOVAL Remove 3 screws (32”), 4 screws (26”), +PSW 3SG Disconnect 3 connectors G1M Board G1 Bracket 1-8. VESA BRACKET REMOVAL Remove 4 screws, +PSW M4X8 Remove 2 screws, +BVTP2 4X16 Remove 4 screws, +PSW M4X8 Remove 2 screws, +BVTP2 4X16 Remove 4 screws, +PSW M4X8 Remove 2 screws, +BVTP2 4X16...

  • Page 16: Lcd Panel/Bracket And Led Light Guide Removal

    KDL-26M3000/26ML130/32M3000/32ML130 LCD PANEL/BRACKET AND LED LIGHT GUIDE REMOVAL CAUTION: Be sure to identify the inverter cover screws before proceeding. DO NOT remove the screws securing the plastic strip holding the lamp sockets. Remove 2 screws, +BVTP2 4X16 Inverter Board Cover LCD Panel Inverter Board Bezel...

  • Page 17: Wire Dressing

    KDL-26M3000/26ML130/32M3000/32ML130 WIRE DRESSING KDL-26M3000/26ML130 ONLY OVERALL VIEW KDL-26M3000/26ML130/32M3000/32ML130...
  • Page 18 KDL-26M3000/26ML130/32M3000/32ML130 KDL-26M3000/26ML130 ONLY MA1 Wire Dressing [Rev: 0.6] 26 inch. MA1 Wire Dressing [Rev: 0.6] GROUND CABLE 26 inch. GND Cable, 1-910-036-30 (165mm) GND Cable, 1-910-036-30 (165mm) LVDS CONNECTOR LVDS cable goes under the BM Bottom Shield. Use middle of plastic clamp as Reference. Reference: LVDS cable goes under the BM Bottom Shield.
  • Page 19 KDL-26M3000/26ML130/32M3000/32ML130 KDL-26M3000/26ML130 ONLY MA1 Wire Dressing [Rev: 0.6] LVDS CONNECTOR (CONTINUED) Draw a horizontal line using the number “0” MA1 Wire Dressing [Rev: 0.6] as a reference Reference Line Draw a horizontal line using the number “0” as a reference R eference Line Dress LVDS cable to have this route.
  • Page 20 KDL-26M3000/26ML130/32M3000/32ML130 KDL-26M3000/26ML130 ONLY HM3 BOARD AND SPEAKERS (CONTINUED) 26 inch. HM3 cable and SpkrL cable trough this clamp. HM3 cable goes from right to left side and White Spkr cable goes opposite direction. Fix cable to metal part using: Himelon Tape (LCD) Different Angle 2-688-062-01 (8x30) Cable and Himelon position...
  • Page 21 KDL-26M3000/26ML130/32M3000/32ML130 KDL-26M3000/26ML130 ONLY INVERTER BOARD CONNECTORS Inverter cable: Inverter Area under G1M Board Inverter cable 1-910-038-36 (300mm) Use clamps on bracket to route cables StandBy cable 1-910-038-29 (450mm) Hold cables using 2 Pin Wires on G1M Inverter cable Goes under G1M KDL-26M3000/26ML130/32M3000/32ML130...
  • Page 22 KDL-26M3000/26ML130/32M3000/32ML130 KDL-26M3000/26ML130 ONLY HDMI CONNECTORS MA1 Wire Dressing [Rev: 0.6] HM3/HM1 cable: 1-910-038-35 (220mm) CAUTION POINT: On this CLAMP, Inverter cable must be inserted before the rest of cables. Himelon Tape 2-688-011-01 (15x60) Reference Inverter cable: 2 cables EMI: coming from under G1M HM1 cable must go under these wires.
  • Page 23 KDL-26M3000/26ML130/32M3000/32ML130 KDL-26M3000/26ML130 ONLY VIDEO CONNECTORS AND GROUND CABLE Video 2 cable with GND: Video2 cable: 1-910-038-33 (210mm) Reference Ferrite Core (140005211) ZCAT 2235-1030 Fix ferrite to panel using: Himelon Core Sheet (A) 2-688-014-01 Use clamp to route GND cable and Wires CAUTION POINT: GND cable must go under Video 2 Cable, as...
  • Page 24 KDL-26M3000/26ML130/32M3000/32ML130 KDL-26M3000/26ML130 ONLY MA1 Wire Dressing [Rev: 0.6] AC CORD CONNECTOR Ferrite Core (150002111) ZCAT 3035-1330 Completely cover Ferrite using: Himelon Cushion LB x 2 (140x20) 2-686-782-11 60 mm 120 mm Reference AC HOLDER 4-022-115-12 Route the cable using this Cut and Clamp on Bracket Reference Fix ferrite to panel using:...
  • Page 25 KDL-26M3000/26ML130/32M3000/32ML130 KDL-26M3000/26ML130 ONLY SHIELD TAPE PLACEMENT DPU: A side Shield Tape (20x40mm) 2-688-010-01 Top view and Bottom View For Reference B side KDL-26M3000/26ML130/32M3000/32ML130...
  • Page 26 KDL-26M3000/26ML130/32M3000/32ML130 KDL-26M3000/26ML130 ONLY SHIELD TAPE PLACEMENT (CONTINUED) STEP 1: Add 1 Himelon Tape (LCD) PN: 2-688-062-01 (8x30mm) Note: R7853 should be covered with himelon. For Reference Tuner For Reference: Edge of Tuner For Reference STEP 2: Add 1 Shield Tape PN: 2-688-010-01 (20x40mm) Apply after putting the himelon (step 1) and the screw.

  • Page 27: Kdl-32M3000/32Ml130 Only

    KDL-26M3000/26ML130/32M3000/32ML130 KDL-32M3000/32ML130 ONLY OVERALL VIEW KDL-26M3000/26ML130/32M3000/32ML130...
  • Page 28 KDL-26M3000/26ML130/32M3000/32ML130 KDL-32M3000/32ML130 ONLY 32 inch. GROUND CABLE GND Cable: 32 inch. GND Cable: GND Cable, 1-910-026-38 (65mm) GND Cable, 1-910-026-38 (65mm) LVDS Cable: LVDS CONNECTOR LVDS Cable: LVDS cable pass trough the middle of this gasket EMI GASKET 30x12 LVDS cable pass trough 2-676-705-01 the middle of this gasket EMI GASKET 30x12...
  • Page 29 KDL-26M3000/26ML130/32M3000/32ML130 KDL-32M3000/32ML130 ONLY MA1 Wire Dressing [Rev: 0.6] LVDS CONNECTOR (CONTINUED) MA1 Wire Dressing [Rev: 0.6] Dress LVDS cable to have this route. Dress LVDS cable to have this route. GND cable connected to HM3 BOARD AND SPEAKERS GND Tab on G1M Brd. GND cable connected to GND Tab on G1M Brd.
  • Page 30 KDL-26M3000/26ML130/32M3000/32ML130 KDL-32M3000/32ML130 ONLY HM3 BOARD AND SPEAKERS (CONTINUED) HM3 cable and SpkrL Himelon Tape (LCD) cable trough this clamp. 2-688-062-01 (8x30) Reference Different Angle Ferrite Core (146908911) ZCAT 1730-0730 Completely cover Ferrite and grab the HM3 cable using: Himelon Core Sheet (A) 2-688-014-01 KDL-26M3000/26ML130/32M3000/32ML130...
  • Page 31 KDL-26M3000/26ML130/32M3000/32ML130 KDL-32M3000/32ML130 ONLY 32 inch. INVERTER BOARD CONNECTORS Inverter cable: Hold cable to G1M Bracket using: Himelon Tape 2-688-011-01 (15x60) Inverter cable 1-910-038-31 (420mm) StandBy cable Use clamps on braket 1-910-038-29 (450mm) to route cables Hold cables using 3 Pin Wires on G1M KDL-26M3000/26ML130/32M3000/32ML130...
  • Page 32 KDL-26M3000/26ML130/32M3000/32ML130 KDL-32M3000/32ML130 ONLY MA1 Wire Dressing [Rev: 0.6] 32 inch. HDMI CONNECTORS Himelon Tape (LCD) 2-688-062-01 (8x30) HM3/HM1 cable: 1-910-038-28 (290mm) Himelon Position: Use UL Tape Position on cable to set the himelon, DO NOT STRESS THE CABLE Reference Reference Himelon Tape 2-688-011-01 (15x60) HM1 cable must go over...
  • Page 33 KDL-26M3000/26ML130/32M3000/32ML130 KDL-32M3000/32ML130 ONLY 32 inch. VIDEO CONNECTORS AND GROUND CABLE Video 2 cable with GND: Video2 cable: 1-910-038-33 (210mm) Reference Ferrite Core (140005211) ZCAT 2235-1030 Fix ferrite to panel using: Himelon Core Sheet (A) 2-688-014-01 GND Cable FASTON 1-910-038-32 (100mm) Use clamps to route GND cable and Wires Page 7/21...
  • Page 34 KDL-26M3000/26ML130/32M3000/32ML130 KDL-32M3000/32ML130 ONLY MA1 Wire Dressing [Rev: 0.6] AC CORD CONNECTOR Ferrite Core (150002111) ZCAT 3035-1330 Completely cover Ferrite using: Himelon Cushion LB x 2 (140x20) 2-686-782-11 80 mm 120 mm AC HOLDER 4-022-115-12 Route the cable using this Cut and Clamp on Bracket Reference Fix ferrite to panel using:...
  • Page 35 KDL-26M3000/26ML130/32M3000/32ML130 KDL-32M3000/32ML130 ONLY SHIELD TAPE PLACEMENT DPU: A side Shield Tape (20x40mm) 2-688-010-01 Top view and Bottom View For Reference B side KDL-26M3000/26ML130/32M3000/32ML130...
  • Page 36 KDL-26M3000/26ML130/32M3000/32ML130 KDL-32M3000/32ML130 ONLY SHIELD TAPE PLACEMENT (CONTINUED) STEP 1: Add 1 Himelon Tape (LCD) PN: 2-688-062-01 (8x30mm) Note: R7853 should be covered with himelon. For Reference Tuner For Reference: Edge of Tuner For Reference STEP 2: Add 1 Shield Tape PN: 2-688-010-01 (20x40mm) Apply after putting the himelon (step 1) and the screw.
  • Page 37 MA1 Wire Dressing [Rev: 0.6] KDL-26M3000/26ML130/32M3000/32ML130 KDL-32M3000/32ML130 ONLY 32 inch. SHIELD TAPE PLACEMENT (CONTINUED) For Reference Shield Tape (20x40mm) 2-688-010-01 Page 11/21 KDL-26M3000/26ML130/32M3000/32ML130...

  • Page 38: Section 2: Service Adjustments

    KDL-26M3000/26ML130/32M3000/32ML130 SECTION 2: SERVICE ADJUSTMENTS 2-1. USING THE REMOTE COMMANDER FOR ELECTRICAL ADJUSTMENTS To adjust various set features, use the Remote Commander to put the set into service mode to display the service menus and categories. Equipment Needed: Pattern Generator (with component outputs) Oscilloscope Digital multimeter 2-2.

  • Page 39: Viewing The Service Menus

    KDL-26M3000/26ML130/32M3000/32ML130 2-3. VIEWING THE SERVICE MENUS Use the Remote Commander to view the BE and Digital service menus options. Sample Service Menu 2-4. RESETTING TO FACTORY DEFAULTS The following instructions restore the User Controls and Channel Memory settings to the preset factory conditions. 1.

  • Page 40: Section 3: Diagrams

    KDL-26M3000/26ML130/32M3000/32ML130 SECTION 3: DIAGRAMS 3-1. CIRCUIT BOARDS LOCATION BM BOARD HM1 BOARD G1M BOARD UM BOARD HM3 BOARD 3-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS INFORMATION All capacitors are in μF unless otherwise noted. pF : μμF 50WV or All voltages are in V. less are not indicated except for electrolytics and tantalums.
  • Page 41 KDL-26M3000/26ML130/32M3000/32ML130 REFERENCE INFORMATION Terminal name of semiconductors in silk screen printed circuit ( RESISTOR CAPACITOR : RN METAL FILM : TA TANTALUM Circuit Device Printed symbol Terminal name : RC SOLID : PS STYROL Collector Transistor : FPRD NONFLAMMABLE CARBON : PP POLYPROPYLENE Base...

  • Page 42: Block Diagram

    KDL-26M3000/26ML130/32M3000/32ML130 3-3. BLOCK DIAGRAM Video 2 CVBS Headphones Tuner Digital IF SIRCS Tuner CVBS Temp. Serial Flash Sensor 512 K SIRCS/ LED, SIRCS, LED/ Light sensor L.Sensor CVBS NAND Flash 16 MB C V B S 64 MB Top Keys YPbPr Key/Power Power button...

  • Page 43: Connection Diagram

    KDL-26M3000/26ML130/32M3000/32ML130 3-4. CONNECTION DIAGRAM SIGNAL INVERTER POWER 32" VDDB VDDB VDDB VDDB VDDB CN1400 CN201 V2_IN_AU_L V2_IN_AU_L D3.3V D3.3V AU_IN_GND AU_IN_GND V2_IN_AU_R V2_IN_AU_R VBLON V2_IN_SSW V2_IN_SSW DIMMER AU_IN_GND AU_IN_GND V2_IN_C V2_IN_C HP_OUT_AU_L HP_OUT_AU_L V2_IN_S2SW V2_IN_S2SW CN4003 HP_IN_GIND HP_IN_GIND DIMMER INVERTER HP_OUT_AU_R HP_OUT_AU_R BACKLIGHT...

  • Page 44: Schematics And Supporting Information

    KDL-26M3000/26ML130/32M3000/32ML130 3-5. SCHEMATICS AND SUPPORTING INFORMATION BM BOARD SCHEMATIC DIAGRAM (1 OF 12) 5V_TU VIDEO1-3 FB1700 R1940 R1942 R1943 MA8100-TX D1013 CHIP 0.5% CHIP CHIP CHIP R1867 RN-CP C1736 R1866 A_V1_IN_Y 1/10W 2012 2012 R1944 2012 CHIP — CHIP R1859 CHIP GND_D R1941...

  • Page 45: Bm Board Schematic Diagram (2 Of 12)

    KDL-26M3000/26ML130/32M3000/32ML130 BM BOARD SCHEMATIC DIAGRAM (2 OF 12) AU_13V AUDIO_9V AUDIO_13V MA111-TX — D2002 R 2202 L 2016 I C 2005 F 2000 22uH 1/16W CHIP B A 09FP-E 2 C 2123 D2014 C 2121 C 2159 0. 001 MM3Z9V1ST1 2012 C 2117 C 2118...

  • Page 46: Bm Board Schematic Diagram (3 Of 12)

    KDL-26M3000/26ML130/32M3000/32ML130 BM BOARD SCHEMATIC DIAGRAM (3 OF 12) << STBY3.3V >> STBY3.3V D3002 STBY3.3V MA785-(TX),SO X3009 BD4729GTR 1608 EEPROM 32.768kHz IC3010 RN-CP 0 . 1 C3114 R3516 1/10W C3011 R3515 — 1/10W RN-CP 6.3V RB3018 C3113 VOUT 0 . 0 1 RESET RB3017 JL3033...

  • Page 47: Bm Board Schematic Diagram (4 Of 12)

    KDL-26M3000/26ML130/32M3000/32ML130 BM BOARD SCHEMATIC DIAGRAM (4 OF 12) — REG5V V 45Y PBPR 10uH V 45PR L 4503 V 45Y D1.8V L 4505 L 4504 V 45PB 10uH 4. 7uH 1608 6. 3V — 6. 3V 1608 1000 0 . 1 1000 C 4546 C 4548...

  • Page 48: Bm Board Schematic Diagram (5 Of 12)

    KDL-26M3000/26ML130/32M3000/32ML130 BM BOARD SCHEMATIC DIAGRAM (5 OF 12) HDMI5V TO AD9380 HDMI3.3V CN5000 GND_D GND_D GND_D PC-R FB5001 0uH RED_AD R5642 — FB5002 0uH PC-G RB5504 GND_D CHIP FROM H2 PWB PC-B GREEN_AD PCA9517DP GREEN_AD IC5511 FB5000 0uH GND_D VCCA VCCB SCL_HDMI_MAIN PS5000...

  • Page 49: Bm Board Schematic Diagram (6 Of 12)

    KDL-26M3000/26ML130/32M3000/32ML130 BM BOARD SCHEMATIC DIAGRAM (6 OF 12) FB4011 STBY3.3V STBY3.3V R4048 FB4009 C4041 C4042 C4043 C4044 C4045 C4046 1/10W POWER1 LFBK1608HS601 POWER_ON 470p 470p 470p 470p 470p 100p RN-CP 0.5% FB4005 R4047 AC_OFF_DET AC_OFF_DET D3.3V — 1005 1005 1005 1005 1005 1005...

  • Page 50: Bm Board Schematic Diagram (7 Of 12)

    KDL-26M3000/26ML130/32M3000/32ML130 BM BOARD SCHEMATIC DIAGRAM (7 OF 12) — R 7047 C 7047 2 . 2 k 220p 1/16W RN-CP 0.5% R 7059 1/16W CHIP REG12V 0. 5A R 7035 R 7041 R 7048 R 7055 3 . 3 k 100k R 7079 1/16W...

  • Page 51: Bm Board Schematic Diagram (8 Of 12)

    KDL-26M3000/26ML130/32M3000/32ML130 BM BOARD SCHEMATIC DIAGRAM (8 OF 12) — X IL L EON242 GROUND BAL L S ASIC CORE POWER D2.5V _A T I D1.0V D3.3V COR E _1.0V R 7201 FB 7200 C 7273 GROUND BALLS POWER_SUPPLY POWER_SUPPLY 4 . 7 I O POW E R 3.3V PI N ( e.g.G PI O) 1/10W 6.

  • Page 52: Bm Board Schematic Diagram (9 Of 12)

    KDL-26M3000/26ML130/32M3000/32ML130 BM BOARD SCHEMATIC DIAGRAM (9 OF 12) DDR2 SDRAM DDR2 SDRAM VDDR_MEM — DDR _1.8V L 7431 C 7430 C 7431 0 . 1 HY B 18T C512160B F-2.5 I C 7400 1608 GND_D GND_D VDD1 NC#R8 DRAM_IF NC#A2 NC#R7 MEM_DQA0 V SS1...

  • Page 53: Bm Board Schematic Diagram (10 Of 12)

    KDL-26M3000/26ML130/32M3000/32ML130 BM BOARD SCHEMATIC DIAGRAM (10 OF 12) DVI_IF DVIDATA0 DVIDATA0 DVIDATA1 — DVIDATA1 DVIDATA2 DVIDATA2 DVIDATA3 DVIDATA3 DVIDATA4 DVIDATA4 DVIDATA5 DVIDATA5 DVIDATA6 DVODATA DVIDATA6 DVIDATA7 DVIDATA7 DCP_VIDEO DVIDATA8 — DVIDATA8 DVIDATA9 RB9021 DVIDATA9 DB-0 DB-0 DVIDATA10 DVIDATA10 DB-1 DB-1 DVIDATA11 DVIDATA11 DB-2...

  • Page 54: Bm Board Schematic Diagram (11 Of 12)

    KDL-26M3000/26ML130/32M3000/32ML130 BM BOARD SCHEMATIC DIAGRAM (11 OF 12) — GND_D GND_D GND_D V IDE O1-3 V IDEO2 JL 7707 JL 7712 JL 7713 V IDEO_IF FRONT_END_IF R 7712 A_V 3_IN_V R 7710 1/16W V I _I N0 CHIP GND_D C 7953 A_V 2_IN_V A_V 2_IN_V L 7801 R 7706...

  • Page 55: Bm Board Schematic Diagram (12 Of 12)

    KDL-26M3000/26ML130/32M3000/32ML130 BM BOARD SCHEMATIC DIAGRAM (12 OF 12) — — L9100 10uH C9115 I2CA_SCL X9100 0 . 1 RN-CP 1/10W 24MHz RN-CP 1/10W I2CA_SDA 1608 R9109 CONT R9111 RB9115 GND_D GND_D R9110 CHIP 1/10W — RN-CP R9117 Q9100 2SA1235TP-1EF DCP_VIDEO C9119 1608 1608...
  • Page 56 KDL-26M3000/26ML130/32M3000/32ML130 [I/O TERMINALS, AUDIO, TVμCON, ANALOG INTERFACE/HDMI RECEIVER, HDMI/PC INPUT, POWER/DC ALERT, X242 POWER/PLL/FLEXBUS/USB/PERIPHERALS, DDR/FLASH/NVM, DIGITAL IF/EJTAG, X242 AUDIO OUT/FE/TUNER, DSP/LVDS] [I/O TERMINALS, AUDIO, TVμCON, ANALOG INTERFACE/HDMI RECEIVER, HDMI/PC INPUT, POWER/DC ALERT, X242 POWER/PLL/FLEXBUS/USB/PERIPHERALS, DDR/FLASH/NVM, DIGITAL IF/EJTAG, X242 AUDIO OUT/FE/TUNER, DSP/LVDS] COMPONENT SIDE CONDUCTOR SIDE CN4002...

  • Page 57: G1M Board Schematic Diagram

    KDL-26M3000/26ML130/32M3000/32ML130 G1M BOARD SCHEMATIC DIAGRAM CN6101 — R6182 1/2W L6203 D6201 2.2uH 21DQ06N-TA2B1 C6148 C6111 R6172 0 . 0 0 1 470p 100k 250V V6101 500V JW6133 JW6132 V6102 C6202 C6251 C6159 0 . 0 1 6 . 3 V 6 .
  • Page 58 KDL-26M3000/26ML130/32M3000/32ML130 [POWER SUPPLY] COMPONENT SIDE EY6206 D6201 PRIMARY SECONDARY A-1315 -710-A EY6142 W6204 L6203 1-874-197-11 EY6142 L6203 W6205 (1-728-829-11) EY6207 D6104 C6106 D6104 R6158 D6201 STBY 3.3V R6158 PF LP D6103 D6103 JW6216 JW6216 C6106 R6157 C6104 JW6208 JW6208 POWER ON R6157 C6122 JW6103...
  • Page 59 KDL-26M3000/26ML130/32M3000/32ML130 [POWER SUPPLY] CONDUCTOR SIDE R6104 R6103 1-874-197-11 R6112 R6109 (1-728-829-11) D6201 C6135 R6155 L6203 IC6103 STBY R6188 D6104 3.3V IC6201 R6158 C6121 R6208 C6122 D6210 IC6101 D6103 R6210 POWER ON R6157 C6104 R6108 R6102 R6225 R6154 C6106 C6201 AC OFF DET R6201 R6119 R6106...

  • Page 60: Hm1 Board Schematic Diagram

    KDL-26M3000/26ML130/32M3000/32ML130 HM1 BOARD SCHEMATIC DIAGRAM POWER — — S101 — TO BM POWER INT CN3008 HOME — INPUT SEL VOL+ VOL- KEY1 MENU WEGAGATE CN101 R107 R102 — — S104 S107 S106 S105 S103 S102 R101 R104 R105 R103 1 . 1 k 1/10W 1/10W USER CONTROL...
  • Page 61 KDL-26M3000/26ML130/32M3000/32ML130 [USER CONTROL] COMPONENT SIDE VOL- S105 R102 S104 S102 S103 S106 R108 INPUT SEL R103 R107 R101 S101 S107 R104 POWER VOL+ HOME 1-874-193-21 MENU C103 (172882721) WEGAGATE [USER CONTROL] CONDUCTOR SIDE CN102 CN101 EP GW GN D102 C102 1-874-193-21 A-1268- 471-A...

  • Page 62: Hm3 Board Schematic Diagram

    CHIP 1/10W GP1UE26RK0VF D305 RN-CP IC401 CL-165HR/SYG-D-T D308 SML-310MTT86 Q303 Q304 RT1N141M-TP-1 RT1N141M-TP-1 — IC320 R402 TPS853(SONY) RN-CP 2012 1/10W 1/10W RN-CP 6 . 3 V R401 R327 C402 CHIP C322 C323 0 . 1 — 6 . 3 V...
  • Page 63 KDL-26M3000/26ML130/32M3000/32ML130 [OPTICAL SENSOR] COMPONENT SIDE Optical Sensor (172882721) 1-874-194-21 POWER IC320 D305 IC320 IC320 IC401 I C401 R327 R327 D305 D305 C323 C323 D308 C323 cam25 cam25 D308 D308 TIMER IC401 A-1268- 472-A cam16 cam16 [OPTICAL SENSOR] CONDUCTOR SIDE EP GW GN 1-874-194-21 (172882721) KDL-26M3000/26ML130/32M3000/32ML130...

  • Page 64: Um Board Schematic Diagram

    KDL-26M3000/26ML130/32M3000/32ML130 UM BOARD SCHEMATIC DIAGRAM J202 — R219 R220 C215 VD201 1000p CHIP CHIP 1608 VD202 VD203 GND_D — V2_IN_AU_L GND TERMINAL D3.3V AU_IN_GND V2_IN_AU_R ET201 HP_OUT_AU_L AU_IN_GND — USB 5V ET202 TO BM USB_PA CN1400 USB_NA USB_GND GND_D HP_OUT_AU_R —...
  • Page 65 KDL-26M3000/26ML130/32M3000/32ML130 [VIDEO 2 IN] COMPONENT SIDE CN205 J201 CN203 JL205 JL205 JL203 JL203 JL204 JL204 JL209 JL209 1-874-196-11 JL211 JL211 (172882811) [VIDEO 2 IN] CONDUCTOR SIDE J201 J201 CN205 CN205 CN205 CN203 JL213 JL213 C213 C213 cam1 cam1 VD202 VD202 R220 R220 JL210...

  • Page 66: Semiconductors

    KDL-26M3000/26ML130/32M3000/32ML130 3-6. SEMICONDUCTORS – KDL-26M3000/26ML130/32M3000/32ML130...

  • Page 67: Section 4: Exploded Views

    See Appendix A: Encryption Key Components in the back of this manual. 4-1. REAR COVER ASSEMBLY AND STAND ASSEMBLY (Check the Sony Electronics Service Information website for any additional service related issues for this model.) 7-685-648-79 SCREW +BVTP 3X12 TYPE2 TT(B)

  • Page 68: Chassis

    See Appendix A: Encryption Key Components in the back of this manual. 4-2. CHASSIS (Check the Sony Electronics Service Information website for any additional service related issues for this model.) 7-685-648-79 SCREW +BVTP 3X12 TYPE2 TT(B) 2-580-629-01...

  • Page 69: Connectors

    See Appendix A: Encryption Key Components in the back of this manual. 4-3. CONNECTORS (Check the Sony Electronics Service Information website for any additional service related issues for this model.) REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF.

  • Page 70: Bezel Assembly, Lcd Panel And Speakers

    See Appendix A: Encryption Key Components in the back of this manual. 4-4. BEZEL ASSEMBLY, LCD PANEL AND SPEAKERS (Check the Sony Electronics Service Information website for any additional service related issues for this model.) 2-580-654-01 SCREW, +PWTP2 4X16...

  • Page 71: Section 5: Electrical Parts List

    KDL-26M3000/26ML130/32M3000/32ML130 SECTION 5: ELECTRICAL PARTS LIST Items marked with an asterisk are not stocked since they NOTE: The components identifi ed by shading RESISTORS are seldom required for routine service. Expect some delay mark are critical for safety. Replace only •...
  • Page 72 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C2103 1-100-764-21 ELECT CHIP 4.7μF C2159 1-100-905-11 CERAMIC CHIP 0.001μF 10% C2104 1-100-764-21 ELECT CHIP 4.7μF C2160 1-100-905-11 CERAMIC CHIP 0.001μF 10% C2161 1-100-905-11 CERAMIC CHIP 0.001μF 10% C2105 1-100-764-21 ELECT CHIP...
  • Page 73 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C3005 1-100-906-11 CERAMIC CHIP 0.01μF C4509 1-100-899-81 CERAMIC CHIP 0.082μF 10% C3006 1-100-906-11 CERAMIC CHIP 0.01μF C4510 1-100-566-91 CERAMIC CHIP 0.1μF C4511 1-100-566-91 CERAMIC CHIP 0.1μF C3007 1-100-906-11 CERAMIC CHIP 0.01μF...
  • Page 74 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C5529 1-100-905-11 CERAMIC CHIP 0.001μF 10% C7033 1-127-988-81 CERAMIC CHIP 0.015μF 10% C5530 1-112-066-11 CERAMIC CHIP 10μF C7034 1-164-858-11 CERAMIC CHIP 22pF C7035 1-100-916-11 CERAMIC CHIP 0.1μF C5531 1-125-777-11 CERAMIC CHIP...
  • Page 75 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C7086 1-107-826-11 CERAMIC CHIP 0.1μF C7233 1-114-148-11 CERAMIC CHIP 1μF 6.3V C7087 1-107-826-11 CERAMIC CHIP 0.1μF C7234 1-114-148-11 CERAMIC CHIP 1μF 6.3V C7235 1-114-148-11 CERAMIC CHIP 1μF 6.3V C7088 1-107-826-11...
  • Page 76 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C7278 1-165-989-11 CERAMIC CHIP 10μF 6.3V C7515 1-100-916-11 CERAMIC CHIP 0.1μF C7279 1-100-566-91 CERAMIC CHIP 0.1μF C7600 1-100-916-11 CERAMIC CHIP 0.1μF C7700 1-100-916-11 CERAMIC CHIP 0.1μF C7280 1-126-210-21 ELECT CHIP 220μF...
  • Page 77 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C7842 1-100-581-81 CERAMIC CHIP 0.0047μF 10% C9116 1-162-970-11 CERAMIC CHIP 0.01μF C7844 1-117-681-11 ELECT CHIP 100μF C9117 1-162-970-11 CERAMIC CHIP 0.01μF C9118 1-162-970-11 CERAMIC CHIP 0.01μF C7845 1-100-916-11 CERAMIC CHIP 0.1μF...
  • Page 78 KDL-26M3000/26ML130/32M3000/32ML130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e. with part number specifi...
  • Page 79 KDL-26M3000/26ML130/32M3000/32ML130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e. with part number specifi...
  • Page 80 KDL-26M3000/26ML130/32M3000/32ML130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e. with part number specifi...
  • Page 81 KDL-26M3000/26ML130/32M3000/32ML130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e. with part number specifi...
  • Page 82 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R1141 1-218-831-11 METAL CHIP 0.50% 1/10W R1876 1-216-864-11 SHORT CHIP R1142 1-218-831-11 METAL CHIP 0.50% 1/10W R1877 1-216-864-11 SHORT CHIP R1878 1-218-831-11 METAL CHIP 0.50% 1/10W R1143 1-218-933-11 RES-CHIP 1/16W...
  • Page 83 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R2117 1-208-687-11 METAL CHIP 1.5K 0.50% 1/16W R2202 1-218-965-11 RES-CHIP 1/16W R2118 1-208-687-11 METAL CHIP 1.5K 0.50% 1/16W R2204 1-218-977-11 RES-CHIP 100K 1/16W R2205 1-218-973-11 RES-CHIP 1/16W R2120 1-218-973-11 RES-CHIP...
  • Page 84 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R2270 1-218-941-81 RES-CHIP 1/16W R3527 1-218-941-81 RES-CHIP 1/16W R2271 1-218-941-81 RES-CHIP 1/16W R3528 1-218-990-81 SHORT CHIP R3533 1-216-864-11 SHORT CHIP R2272 1-218-941-81 RES-CHIP 1/16W R2273 1-218-973-11 RES-CHIP 1/16W R3534 1-216-864-11...
  • Page 85 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R4578 1-208-675-11 METAL CHIP 0.50% 1/16W R7001 1-216-815-11 METAL CHIP 1/10W R4579 1-208-675-11 METAL CHIP 0.50% 1/16W R7002 1-216-821-11 METAL CHIP 1/10W R7003 1-216-821-11 METAL CHIP 1/10W R4580 1-208-675-11 METAL CHIP...
  • Page 86 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R7052 1-208-691-11 METAL CHIP 2.2K 0.50% 1/16W R7334 1-216-864-11 SHORT CHIP R7053 1-218-941-81 RES-CHIP 1/16W R7335 1-216-864-11 SHORT CHIP R7337 1-218-965-11 RES-CHIP 1/16W R7054 1-208-691-11 METAL CHIP 2.2K 0.50% 1/16W R7055...
  • Page 87 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R7800 1-218-953-11 RES-CHIP 1/16W R9111 1-216-821-11 METAL CHIP 1/10W R7808 1-218-949-11 RES-CHIP 1/16W R9117 1-216-864-11 SHORT CHIP R9139 1-216-803-11 METAL CHIP 1/10W R7814 1-218-941-81 RES-CHIP 1/16W R7819 1-218-941-81 RES-CHIP 1/16W...
  • Page 88 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES RB3017 1-239-674-81 RESISTOR, NETWORK 100 RB9106 1-234-524-21 RES, CHIP NETWORK 33 (3216) RB3018 1-239-698-11 RESISTOR, NETWORK 10K RB9107 1-234-524-21 RES, CHIP NETWORK 33 (3216) RB9108 1-234-524-21 RES, CHIP NETWORK 33 (3216) RB3021 1-239-674-81 RESISTOR, NETWORK 100...
  • Page 89 KDL-26M3000/26ML130/32M3000/32ML130 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES VD5520 1-802-417-11 SURGE ABSORBER C6131 1-115-412-11 CERAMIC CHIP 680pF VD5522 1-802-417-11 SURGE ABSORBER C6132 1-107-906-11 ELECT 10μF C6133 1-100-597-91 CERAMIC CHIP 0.1μF VD5523 1-802-417-11 SURGE ABSORBER VD5524 1-802-417-11 SURGE ABSORBER C6134...
  • Page 90 KDL-26M3000/26ML130/32M3000/32ML130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e. with part number specifi...
  • Page 91 KDL-26M3000/26ML130/32M3000/32ML130 NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les remplacer mark are critical for safety. Replace only que par une piece portant le numero specifi e. with part number specifi...
  • Page 92 8-719-085-26 DIODE CL-165HR/SYG-D-T A-1268-471-A HM1 BOARD, MOUNTED D308 8-719-053-07 DIODE SML-310MTT86 CONNECTOR CN101 1-820-180-11 HEADER ASSEMBLY (PRINT PWB) IC320 6-600-447-01 TPS853(SONY) IC401 6-600-502-01 GP1UE26RK0VF RESISTOR TRANSISTOR R101 1-218-827-11 METAL CHIP 0.50% 1/10W R102 1-218-831-11 METAL CHIP 0.50% 1/10W Q303 8-729-028-96...
  • Page 93 VD204 1-804-988-21 VARISTOR, CHIP (1608) VD205 1-804-988-21 VARISTOR, CHIP (1608) REMOTE COMMANDER 1-480-266-11 REMOTE COMMANDER (RM-YD021) 9-885-099-05 BATTERY COVER (for RM-YD021) Sony Corporation English Sony Technology Center 2007GJ74WEB-1 Technical Services Printed in USA 9-883-757-02 Service Promotion Department © 2007.7 KDL-26M3000/26ML130/32M3000/32ML130...

  • Page 94: Appendix A: Encryption Key Components

    MUST BE RETURNED to Sony. b) and if the core charge is NOT covered under the product warranty, the defective un-repaired or modifi...
  • Page 95 In an effort to reduce the size of this pdf fi le the tiled schematics are not attached to this Service Manual. To receive a complete set of the tiled schematics for this manual please submit a request to the Service Promotion Department at Service_Promotion@am.sony.com.

This manual is also suitable for:

Kdl-26m3000Kdl-32ml130Kdl-32m3000

Table of Contents