[] Using The Picture Menu - Sony BRAVIA KDL-26M4000 Operating Instructions Manual

Picture Mode Vivid For enhanced picture contrast and sharpness.
Cus'tomi_ed picture
Standard
For standard picture settings. Recommended for home entertainment.
yielding Cinema .......... For viewdng fihn-based content. Most suitable t-or viewdi_g in a theater _- ......
like environment.
Backlight
Pre ss 4,(* t0 brighten 0r darken the backlight, then Press @ to set. ....
Picture Press I./* to increase or decrease picture contrast, then press @ to set.
Brightness
Press _.(* to brighten or darken the picture, then press @ to set.
COlOI_......................................press I.(._ to increase or decrease color intensity, then press @ to set;
Hue .............
press ./.!o increase or decrease the green or red ..................................................
Color
Temp (Color
Cool Gives the white colors a bluish tint.
Temperature) Neutral ...................................... Gii'es the
white Colors a nentrai
tint. ............................................................................
Warm 1, 2
Gives the white colors a reddish tint.
Sharpness Press _./* to sharpen or soften the picture, then press @ to set.
Advanced
Settings
Noise
Reduces the noise level of connected equipment, and the
Reduction
CABLE/ANTENNA input.
Black Corrector Enhances black areas of the picture for stronger contrast.
Gamma
Adjusts the balance between the light and dark areas of the picture.
Clear White
Emphasizes white and light colors.
Live Color Makes colors more vivid aud reproduces clear skin tones.
Light
Sensor Select On to enable the automatic picture (screen) brightness control.
The light sensor measures the room brightness which allows the TV to
antomatically adjust the backlight brightuess based on the picture
settings and the ambient room light conditions.
• Be sure not to put anything around the sensor, as its function may be
affected.
• In low light the range of the backlight control is reduced when
Light
Sensor is
set to
On.
Reset Resets the current Picture Mode setting to factory def_mlt values.
3O