If you experience
any of tile following
using tile player, use this troubleshooting
guide to help
ShouM any problem
consult your nearest Sony dealer.
There's no sound.
that the player
The CDdoes not play.
•"_There's no CD inside the player (" NO DISC "
appears). Insert a CD.
•"_Insert the CD with the label side facing right.
•"_Clean the CD (see page 3).
•"_Moisture has condensed inside tile player.
Remove the disc and leave the player turned on
for about an hour (see page 34).
The remote does not function.
in the path of the remote and
•"*'Point the remote at the remote sensor  on the
•"_Be sure to set up tile remote correctly.
all tile batteries
in tile reinote with new
ones if they are weak.
•"_Set the command
mode of the remote according
to the command
mode of the player.
MP3 files take longer to play back than others.
discs take a longer time to start
a disc recorded
a disc recorded
in Multi Session.
a disc to which data can be added
About ID3 tag version 2
not a malflmction,
occurs when an MP3 file containing
ver.2 is played:
of ID3 tag ver.2
(at the beginning
of the track), sound is not
Skip time changes
tag vet.2 capacity.
Example: At 64 kbytes, it is about 2 seconds
of ID3 tag ver.2 is
For MP3 files of a bit rate other
than 128 kbps, time is not displayed
When an MP3 file is created with MP3
tag vet.2 will automatically
is a registered
As of December,
The player functions incorrectly.
•"*'The nficrocoinputer chips may be operating
incorrectly. Disconnect the AC power cord, then
connect it back to the wall outlet to reset the
MP3 files cannot be played back.
was not perfi)rmed
ISO 9660 level 1 or level 2 timnat,
or the Joliet or
Romeo in the expansion
•"_The file extension
".MP3" is not added to the
•"_Files are not stored in MP3 format.