Playing Alternately (No-Delay Play/X-Fade Play) - Sony CDP-CX455 Operating Instructions Manual

Loading the Disc Names of the second CD
player
If"the second
CD player has the [)is(" Name t_mction
(see page 23), you can load tile Disc Names of tile
second CD player into this player's memory and
display them on this player.
1
Press MENU/NO.
2
Turn the JOG dial until "LOAD 2ndNAME?"
flashes ill tile display.
/ c0_ IZI -I t2.2t :_l
3 Push the JOG dial.
This player starts loading. (Loading takes about
one
ininllte.)
Labeling discs of the second CD player
You can label discs of tile second CD player or change
the Disc Names loaded fi'Oln tile second CD player.
1
Press MEGA CONTROL
The MEGA CONTROL button lights up.
2
Turn the
JOG
dial to select tile disc you want to
assign a Disc Name to.
If tile disc slot you select does not contain a disc,
"NO DISC" appears in tile display and you cannot
assign a Disc Naine.
:3 Press MENU/NO.
"NAME IN?" appears.
Push the JOG dial.
5 Input tile new Disc Name fiollowing the procedure
in "Labeling discs (Disc Name)" on page 23.
Note
The new Disc Names are stored on this player's memory, so
you cannot display them on the second CD player.
Playing Alternately (No-Delay
Play/X-Fade Play)
When you connect a second player, you can play tracks
ill this player and those from tile second player
alternately in ally play i-llode (see "Connecting another
CD player" on page 8).
Select one of the tollowing methods:
• No-Delay Play: The current player changes at each
track. Each time the current player changes to tile
other player, the other player starts play without a
break in sound immediately after tile current player
ends play. The other player skips the lead-in portion
and starts playing fi'oin where the sound actually
begins.
• X-Fade Play: Tile current player changes at each
track or at tile specified interval. You can select the
interval, 30, 60, or 90 seconds. Each tii'*le tile current
player changes to the other player, tile sound from
both players is inixed. Tile current player ends play
by fading out, and the other player starts play by
fading in.
X-FADE NO DELAY
I
Select tile desired disc and play mode for each
player.
2 When you select No-Delay Play
Press NO DELAY.
"NO DELAY" appears in tile display.
When you select X-Fade Play
Press X FADE.
"X FADE" appears in tile display.
Each time you press the X FADE button, tile
indication appears as flfllows:
yX-Ftf::l:f:)f:e 7 at track e:lf:le_oa;'te:,:.30 see_
To change tile current player each time a whole
track is finished, select "at track end."
To change the current player at the specified
intewal, press X-FADE repeatedly until the
intmwal you want appears in tile display.continued)(
31 t/s