Troubleshooting - Sony CFD-676 Operating Instructions Manual

Troubleshooting
Symptom ¢-
The power does not come on.
There is no audio.
The audio is weak or has poor
The picture of your TV becomes
Remedy
Connect the AC power cord securely.
Make sure the display window is displaying the
function you want to operate.
Adjust the volume.
Unplug the headphones when listening through
speakers.
Move the player away from the TV.
If you are using the remote while listening to
AM radio, noise may be heard. This is
unavoidable.
If you are listening to an FM program near the
TV with an indoor antenna, move the player
away from the TV.
"no disc" lights in the display even
The CD does not play and "Error"
The tape does not move when you
press an operation button.
* Insert the CD with the label surface up.
Make sure that the disc tray is closed.
Place the CD with the label surface up.
Clean the CD.
Take out the CD and leave the disc tray open for
about an hour to dry moisture condensation.
Make sure "CD" appears in the display.
Reduce the volume.
Clean the CD, or replace it if the CD is badly
damaged
Place the player in a location free from
vibration.
Close the cassette compartment securely.
The REC @ button does not
function/The tape does not play.
i
o
c
a
1)
quality.
2
uo]
6
[4
unstable.
when a CD is in place.
" lights in the display.
S.
Bu
a
a
vu
The sound drops out.
-
@
~
pi
a
a
[-%
©
ra
The tape does not erase completely.
Make sure the safety tab on the cassette in deck
B is in place.
Make sure that "TAPE" appears in the display.
Clean the erasing heads (see page 35.)
continued
Additional Information
33
~