Cf Channel Settings - Sony BRAVIA KDL-40Z4100 Operating Instructions Manual

Signal Type
Auto Program
Add Digital Channels
Show/Hide Channels
Edit Channel Labels
Cable
For receiving cable channels via cable TV provider.
Antenna For receiving signal via over-the-air antenna.
• You should run Auto
Program
after changing the Signal Type setting.
Automatically sets the channel list in the TV for all receivable channels. Channel scanning
will be based on the Signal Type (Cable/Antenna) setting.
1 Select Auto Program.
2
Se=ect OK to start Auto Program. When Auto Program is completed, tile screen
will display tile mnnber of channels found.
3
Press RETURN to exit Auto Program.
• Running
Auto Program will clear tile Favorites
channel list for tile current signal
type.
• If you run Auto
Program
again, previously scanned channels will be overwritten with
the newly scanned channels.
Select to add digital channels. Be sure to have the Signal Type option selected
appropriately for the signal source. (Useful for antenna installations.)
Allows you to show or hide channels when you surf with the CH +/- button or in the TV
channel list on the XMB_x_.
1 Press €/I" to scroll through the channels until you highlight the channel to show or
hide.
2
Press @ to select Shown or Hidden.
To show or hide more channels, repeat steps 1-2.
• Hidden channels can be accessed by entering the channel number with 0-9 buttons on
the remote control.
Assigns labels (such as station call letters) to channel numbers.
1 Press ,1,/!1,to scroll through the channel numbers. Then press @ to select the channel
number to assign a label.
2 Press ,1,/!1,to scroll through the label characters (A-Z, 0-9, etc.). Press * to move to
the next character. Repeat to add up to 7 characters to the label. Press @ to set it.
To assign labels to more channels, repeat steps 1-2.
• This feature is not available when using the TV Guide On Screen system.
2
"-t
r0
47