Channel Settings - Sony BRAVIA KDL-46S3000 Operating Instructions Manual

Cable
Auto Program
Add Digital Channels
Show/Hide Channels
Edit Channel Labels
On
For receiving cable channels via cable TV provider.
Off For using an antenna.
• You should run Auto
Program
after changing the Cable setting.
Automatically sets up the channel list on the TV for all receivable channels. Channel
scanning will be based on the Cable On/Off setting.
1 Select Auto
Program.
2 Select OK to start Auto
Program.
When Auto
Program
is completed, the screen
will display the number of channels found.
3 Press RETURN to exit the Auto
Program.
• Running Auto
Program
will clear Favorites list.
• If you run Auto
Program
again, previously scanned channels will be overwritten with
the newly scanned channels.
Select to acid digital channels. Be sure to have the Cable option selected appropriately for
the signal source. (Useful for antenna installations.)
Allows you to show or hide channels when you surf with the CH +/- button or in the TV
channel
list on the XMB rxt.
1 Press 11411, to scroll through the channels until you highlight the channel to show or
hide.
2 Press @ to select Shown or Hidden.
To show or hide more channels, repeat steps 1-2.
• Hidden channels can be accessed by entering the channel number with 0-9 buttons on
the remote control.
Assigns labels (such as station call letters) to channel numbers.
1 Press tl./!1, to scroll through the channel numbers. Then press @ to select the channel
number to assign a label.
2 Press tl./,1!,to scroll through the label characters (A-Z, 0-9, etc.). Press * to move to
the next character. Repeat to add up to 7 characters to the label. Press @ to set it.
To assign labels to more channels, repeat steps 1-2.
2
"d
(n
35