Sony BRAVIA KDL-40Z4100 Operating Instructions Manual page 46

4:3 Default Wide Zoom Enlarges the 4:3 picture to fill the 16:9 screen, displaying as much of
Select the &!fl_tdt .s'creet_ the original image as possible.
mode to
us'efi_r
4:3 Normal Displays the 4:3 picture in its original aspect ratio.
,_OIdFCC,_'
Full Select to enlarge the 4:3 picture horizontally only, to fill the screen.
Zoom
Select to enlarge the picture horizontally and vertically to fill the
screen while maintaining the aspect ratio.
Off Select to continue using the current Wide Mode setting when the
channel or input is changed.
Display Area
Normal
-1/-2
Screen Position
Vertical Size
• 4:3 Default is not available if Auto Wide is set to Off.
• I1"4:3 Default is set to anything but Off, the Wide Mode setting applies only to the
current channel. When you change channels (or inputs), Wide Mode is automatically
replaced with the 4:3 Default setting for 4:3 sources. To retain the current Wide Mode
setting as channels and inputs are changed, set 4:3 Default to Off.
Full Pixel Displays the picture t_r 1080i, 1080p or 1080124p sources in its
original size.
Displays the picture in its original size.
Enlarges the picture to hide the edges of the picture.
• For 720p, 1080i, 1080p and 1080124p, feature is only available when Wide Mode is set
to Full.
Adjust the
Vertical
positioning by pressing tt/,l!,. Press _,/* to adjust the
Horizontal
positioning.
• Screen Position feature is useful if the TV is connected to game equipment.
• Vertical position is available only when Wide Mode is set to Zoom.
• For high-definition signals, Vertical and Horizontal positions are not available.
Adjusts the vertical size of a standard-definition picture.
• Vertical Size is available only when Wide Mode is set to Wide Zoom or Zoom for
standard-definition channels.
Auto
Adjust
Select Yes to start the anto adiust for the PC input.
Reset
Resets the settings to the default values.
Phase Adjust alter Pitch to fine tune overall sharpness.
Pitch
Adjust uneven sharpness on screen.
• For the PC Input Signal Reference Chart, see page 14.
H Center Allows you to move the position of the picture horizontally (left and right).
V Center Allows you to move the position of the picture vertically (up and down).
Wide Mode Normal Select to display the picture in its original resolution and aspect ratio.
Full 1 Select to enlarge the picture to fill the screen, while maintaining its
original aspect ratio.
Full 2 Select to enlarge the picture to fill the screen.
• Wide Mode can also be accessed by pressing WIDE on the remote control.
• See WIDE button description on page 22 for accessing Wide Mode.
• Phase and Pitch options are not available with PC signal connected to HDMI inpnt.
46