Digital Tv Set-Top Box With Component Video Connectors - Sony WEGA KLV30XBR900 Operating Instructions Manual

Digital TV Set-Top
Box with
Component
Video Connectors
il);i_, C :(;_,_X!_!_C;I: _i;!_ (iii!iii!!iiiiiiiii_!;_i!! ii'_ii _ {i;i{_!i/i>/x3,!i;;_ {il}(;i;X W?i:ili CO_iiii_:i3_(;i_,_i_s!_!_/! Viii_£iii{_!_(;i_, C(;i_,_i_s!_!_Ci:x3:/S
Use three separate component video cables to connect the set-top box's
Y, PB and PR jacks to the Y, P_ and Pa jacks (VIDEO 4) on the TV.
The Y, PB and PR jacks on your set-top box are sometimes
labeled Y, CB and CR, or Y, B-Y and R-Y. If so, connect the
cables to their matching color jacks.
Use an audio cable to connect the set-top box's audio output jacks to the
TV's VIDEO 4 audio input jacks.
Component video cables
Audio cable
i:ot;so Us ; I ,isCo_,;_::_o_
Watch the digital TV set-top box Press T'i '/ D /0 repeatedly to select the digital TV set-top box input (VIDEO 4 in
the illustration).
Label video inputs to easily See the instructions for setting up Video Labels on page 90.
identify equipment connected to
the TV
You cannot record the signal from any equipment connected
into the Y, PB, PR jacks.