Installing The Tv - Sony WEGA KLV30XBR900 Operating Instructions Manual

_i_'¸ _ :_:_h i'u _':J_i!ii:?@ Y"'i_Y
Connect the display interface cable (supplied) to the display unit's DISPLAY
SIGNAL IN jack, and connect the AC power cord (supplied) to the display
unit's AC IN jack.
Disconnect all power sources before making any connections.
Tighten the
screw slowly
until the
screw is
stabilized.
AC Power cord
(supplied)
After making all----=I __
connections, 1_
connect to a wall
outlet.
l isplay interface
cable (supplied)
0
To Media receiver unit.
Install the display unit using an optional wall mount unit.
For details, refer to the operating instructions supplied with your wall mount unit.
If not using wall mount unit, pass a wire through two holes to anchor it to the wall.
Anchor holes to prevent falling