Sony WEGA KLV30XBR900 Operating Instructions Manual page 27

Connect your cable company to the TV's VHF/UHF jack using the
supplied antenna cable.
Use a coaxial cable to connect the TV's TO CONVERTER jack to the
cable box's input jack. (The TV's internal converter lets you switch
between unscrambled signals coming straight into the TV and
scrambled signals coming in through the cable box, eliminating the need
for an external splitter.)
Use a coaxial cable to connect the cable box's output jack to the TV's
AUX jack.
Run the Auto Setup program, as described in "Setting Up the Channel
List" on page 49.
Coaxial cable AUX
IN
_ OUT _ TO CONVERTER
75-ohm coaxial cable
(not supplied)
VHF/UHF
Antenna cable (supplied)
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4) and then
use the cable box to switch channels.
Set up the TV remote control to Program the remote control. See "Programming the Remote Control" on page 54.
operate the cable box
Activate the remote control to Press l? repeatedly until the SAT/CABLE indicator lights
operate the cable box up,
Prevent the accidental switching When using the cable box, you need the TV to stay on the channel the cable box is
of TV channels set to (usually channel 3 or 4). You can use the TV's Channel Fix feature to lock in a
specific channel. For details, see "Using the Channel Menu" on page 84.
Switch the TV's input between Press to switch back and forth between the TV's VHF/UHF (unscrambled
the cable box and cable channels) and AUX (scrambled) inputs.