Sony WEGA KLV30XBR900 Operating Instructions Manual
Sony WEGA KLV30XBR900 Operating Instructions Manual

Sony WEGA KLV30XBR900 Operating Instructions Manual

Lcd color tv
Hide thumbs Also See for WEGA KLV30XBR900:
Table of Contents

Advertisement

4-093-894-11 (1)
LCD Color TV
Operating Instructions
KLV30XBR900
2003 Sony Corporation

Advertisement

Table of Contents
loading

Summary of Contents for Sony WEGA KLV30XBR900

  • Page 1 4-093-894-11 (1) LCD Color TV Operating Instructions KLV30XBR900  2003 Sony Corporation...
  • Page 3 WARNING To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
  • Page 4: Trademark Information

    The model and serial numbers are located at the rear of the TV, below the Sony logo, on the sticker, and also on the TV box (white label). Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
  • Page 5: Important Safeguards

    If the AC power cord or display cable is damaged, stop using it and ask your dealer or Sony service center to exchange it. Cleaning Unplug the AC power cord when cleaning this unit. If not, it may result in electric shock.
  • Page 6: Ac Power Cord

    The set may fall, causing serious injury to a child or an adult and serious damage to the set. Use only a cart or stand recommended by Sony for the specific model of TV. No part of the TV set should overhang any edge of the TV cart or stand;...
  • Page 7 Recommended place for the Media receiver unit Place the Media receiver unit on a stable, level surface. Otherwise, the Media receiver unit may fall and cause injury. Use an optional Sony stand, which has adequate strength. Weight Do not stand on the Media receiver unit. The unit may fall or break, causing injury.
  • Page 8: Damage Requiring Service

    Ship and vessel Do not install this unit in a ship or vessel. If the unit is exposed to seawater, it may cause fire or damage the unit. Fall Do not hang anything on the unit. The unit may fall from the stand or wall mount unit, causing damage or serious injury.
  • Page 9: Replacement Parts

    Servicing Do not attempt to service the set yourself since opening the cabinet may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Replacement Parts When replacement parts are required, be sure the service technician certifies in writing that he has used replacement parts specified by the manufacturer that have the same characteristics as the original parts.
  • Page 10: Important Safety Instruction

    Important Safety Instruction Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Page 11: Table Of Contents

    Contents Contents Introducing the TV Setting Up the TV Welcome...13 Package Contents...13 Features ...13 Overview ...15 TV Controls and Connectors...16 Display unit...16 Media receiver unit Front Panel ...17 Media receiver unit Rear Panel ...18 Installing the TV...20 Basic Connections: Connecting a Cable or Antenna ...22 Cable or Antenna Only ...23 Cable and Antenna Only ...24 Cable Box and Cable Only...25...
  • Page 12 Using the Remote Control Using the Features Overview ...51 Inserting Batteries...51 Button Descriptions ...52 Programming the Remote Control...54 Using Other Equipment with Your TV Remote Control ...56 All Equipment ...56 Operating a VCR ...56 Operating a Satellite Receiver ...56 Operating a Cable Box...57 Operating a DVD Player...57 Operating an MDP (Laserdisc Player) ...57 Overview ...59...
  • Page 13 Using the Setup Menu...89 Selecting Setup Options...89 Overview ...93 Glossary ...94 Notes on Using Memory Stick Media ...95 Memory Stick Precautions ...95 Contacting Sony ...96 Troubleshooting ...96 Twin View ...96 Remote Control ...97 Memory Stick ...97 Video ...98 Audio ...99 Channels ...99...
  • Page 15: Introducing The Tv

    Introducing the TV Welcome Thank you for purchasing the Sony LCD Color TV. This manual is to be used with the following models: Package Contents The package contains the following: These items are all you need to set up and operate the TV in its basic configuration.
  • Page 16 Moving pictures will appear clearer and more natural-looking. • Newly developed LCD panel driver IC: Developed to improve screen response time, using proprietary digital technology by Sony. By improving the response time in the middle luminance range, ‘afterimage’ in motion pictures is significantly reduced, resulting in smoother movement of images on the screen.
  • Page 17: Setting Up The Tv

    Setting Up the TV Overview This chapter includes illustrated instructions for setting up your TV. Topic TV Controls and Connectors Installing the TV Basic Connections: Connecting a Cable or Antenna Connecting Optional Equipment Using the CONTROL S Feature Setting Up the Channel List VCR and Cable VCR and Cable Box Two VCRs for Tape Editing...
  • Page 18: Tv Controls And Connectors

    LED lights up in red. The LED does not light up when the main power is turned off. If the LED blinks continuously, this may indicate the display unit needs servicing (see “Contacting Sony” on page 96). POWER/STANDBY...
  • Page 19: Media Receiver Unit Front Panel

    If the LED blinks continuously, this may indicate the Media receiver unit needs servicing (see “Contacting Sony” on page 96). When lit, indicates one of the timers is set. When the timer is set, this LED will remain lit even if the TV set is turned off.
  • Page 20: Media Receiver Unit Rear Panel

    Jack Description 1 CONTROL S OUT Allows the TV to send remote control signals to other Sony infrared-controlled audio or video equipment that has the CONTROL S function. 2 AUDIO OUT Connects to the left and right audio input jacks of your audio or video equipment. You can (VAR/FIX) use these outputs to listen to your TV’s audio through your stereo system.
  • Page 21 Jack Description qs HD/DVD Connect to your DVD player’s or digital set-top box’s component video (Y, P audio (L/R) jacks. Component video provides better picture quality than 4, 0, or qa). (1080i/720p/480p/ 480i) (VIDEO IN 4/5) ) and...
  • Page 22: Installing The Tv

    Installing the TV Tighten the screw slowly until the screw is stabilized. Connect the display interface cable (supplied) to the display unit’s DISPLAY SIGNAL IN jack, and connect the AC power cord (supplied) to the display unit’s AC IN jack. Disconnect all power sources before making any connections.
  • Page 23 Connect the other end of display interface cable to the Media receiver unit’s DISPLAY SIGNAL OUT jack, and connect the AC power cord (supplied) to the media receiver unit’s AC IN jack. CONTROL S R–AUDIO–L AUDIO (VAR/FIX) AUDIO IN AV MOUSE R–AUDIO–L R–AUDIO–L HD/DVD IN...
  • Page 24: Basic Connections: Connecting A Cable Or Antenna

    Basic Connections: Connecting a Cable or Antenna The way in which you will connect your TV varies, depending on how your home receives a signal (cable, cable box, antenna) and whether or not you plan to connect a VCR. If You Are Connecting Cable or Antenna Only Cable and Antenna Only Cable Box and Cable Only...
  • Page 25: Cable Or Antenna Only

    Cable or Antenna For best results, use one of the following connections if you are connecting a cable or an antenna and you: Only For antenna connection, use the supplied antenna cable. 75-ohm coaxial cable (usually found in newer homes) Cable Type VHF Only or combined...
  • Page 26: Cable And Antenna Only

    Cable and Antenna For best results, use this connection if you: Only For antenna connection, use the supplied antenna cable. Cable Type Cable TV (CATV) and Antenna About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you cannot view antenna channels in the right dual picture window.
  • Page 27: Cable Box And Cable Only

    Cable Box and Cable For best results, use this connection if: Only With this connection you can: About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features for unscrambled channels coming directly into the TV’s VHF/UHF input jack.
  • Page 28 To connect the cable box and cable Notes on Using This Connection To Do This ... Do This ... Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4) and then use the cable box to switch channels.
  • Page 29: Cable Box Only

    Cable Box Only For best results, use this connection if: With this connection you can: About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, all channels come into the TV through your cable box and only one unscrambled signal is sent to the TV, so you cannot use the dual picture features.
  • Page 30 To connect the cable box Notes on Using This Connection To Do This ... Do This ... Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4) and then use the cable box to switch channels.
  • Page 31: Connecting Optional Equipment

    Connecting Optional Equipment Use the directions in this section to connect the following optional equipment: If You Are Connecting VCR and Cable VCR and Cable Box Two VCRs for Tape Editing Satellite Receiver Satellite Receiver and VCR DVD Player with Component Video Connectors 40 DVD Player with S VIDEO and Audio Connectors Digital TV Set-Top Box with Component Video...
  • Page 32: Vcr And Cable

    VCR and Cable For best results, use this connection if: About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features. To connect the VCR and cable Rear of Media receiver unit VHF/UHF R–AUDIO–L AUDIO...
  • Page 33 Watch cable channels Press Set up the TV remote control to If you have a non-Sony VCR, you must program the remote control. See operate the VCR “Programming the Remote Control” on page 54. Activate the TV remote control to...
  • Page 34: Vcr And Cable Box

    VCR and Cable Box For best results, use this connection if: About Using This Connection with Dual Picture (Twin View, etc.) Features With this connection, you can use all the dual picture features. With this connection you can: To connect a VCR and cable box, you need: To connect the VCR and cable box Your cable company scrambles some channels, such as premium channels (which requires you to use a cable box), but does not scramble...
  • Page 35 Watch the VCR Press Set up the TV remote control to If you have a non-Sony VCR, you must program the remote control. See operate the cable box or VCR “Programming the Remote Control” on page 54. Activate the remote control to...
  • Page 36: Two Vcrs For Tape Editing

    Two VCRs for Tape Connecting two VCRs lets you record from one VCR to the other. By Editing connecting them as shown below, you can view (monitor) what is being recorded. To connect two VCRs for tape editing Rear of Media receiver unit Playback VCR R–AUDIO–L AUDIO...
  • Page 37 Press recorded above). Set up the TV remote control to If you have a non-Sony VCR, you must program the remote control. See operate the VCR(s) “Programming the Remote Control” on page 54. Activate the TV remote control to Press...
  • Page 38: Satellite Receiver

    Satellite Receiver To connect a satellite receiver Rear of Media receiver unit VHF/UHF CONVERTER R–AUDIO–L AUDIO SUBWOOFER (VAR/FIX) (VAR) DVI–HDTV DVI–HDTV IN WHITE R–AUDIO–L VIDEO S VIDEO VIDEO IN DISPLAY SIGNAL OUT Connect the satellite antenna cable to the satellite receiver’s satellite input jack.
  • Page 39 Press TV/VIDEO repeatedly to select the satellite receiver input (VIDEO 1 in the illustration). If you have a non-Sony satellite receiver, you must program the remote control. See “Programming the Remote Control” on page 54. FUNCTION Press repeatedly until the See “Operating a Satellite Receiver”...
  • Page 40: Satellite Receiver And Vcr

    Satellite Receiver To connect a satellite receiver and VCR and VCR Rear of Media receiver unit VHF/UHF CONVERTER R–AUDIO–L AUDIO SUBWOOFER (VAR/FIX) (VAR) DVI–HDTV DVI–HDTV IN WHITE R–AUDIO–L VIDEO S VIDEO VIDEO IN DISPLAY SIGNAL OUT A/V cable Connect the satellite antenna cable to the satellite receiver’s satellite input jack.
  • Page 41 (VIDEO 1 in the illustration). Set up the TV remote control to If you have a non-Sony VCR or satellite receiver, you must program the remote operate the satellite receiver or control. See “Programming the Remote Control” on page 54.
  • Page 42: Dvd Player With Component Video Connectors

    DVD Player with For best results, use this connection if your DVD player has component Component video (Y, P Video Connectors To connect a DVD player with component video connectors Rear of Media receiver unit CONTROL S R–AUDIO–L AUDIO (VAR/FIX) AUDIO IN AV MOUSE R–AUDIO–L...
  • Page 43 Watch the DVD player Press Set up the TV remote control to If you have a non-Sony DVD player, you must program the remote control. See operate the DVD player “Programming the Remote Control” on page 54. Activate the TV remote control to...
  • Page 44: Dvd Player With S Video And Audio Connectors

    Watch the DVD player Press Set up the TV remote control to If you have a non-Sony DVD player, you must program the remote control. See operate the DVD player “Programming the Remote Control” on page 54. Activate the TV remote control to...
  • Page 45: Digital Tv Set-Top Box With Component Video Connectors

    Digital TV Set-Top To connect a digital TV set-top box with component video connectors Box with Component Video Connectors Component video cables Rear of Media receiver unit CONTROL S AUDIO (VAR/FIX) AUDIO IN AV MOUSE R–AUDIO–L R–AUDIO–L HD/DVD IN ( 1080i / 720p / 480p / 480i ) Notes on Using This Connection To Do This ...
  • Page 46: Digital Satellite Receiver With Dvi-Hdtv Connector

    Digital Satellite To connect a digital Satellite Receiver with DVI-HDTV connector Receiver with DVI-HDTV connector Digital Satellite Receiver VIDEO OUT (480i) OPTICAL AUDIO OPTICAL S. VIDEO AUDIO OUT Notes on Using This Connection To Do This ... Do This ... Watch the digital satellite receiver Press the illustration).
  • Page 47: Camcorder

    Camcorder For easy connection of a camcorder, the TV has front A/V input jacks. If you prefer, however, you can connect the camcorder to the TV’s rear A/V input jacks. To connect a camcorder Use an A/V cable to connect the camcorder’s A/V output jacks to the TV’s A/V input jacks.
  • Page 48: Audio Receiver

    Audio Receiver For improved sound quality, you may want to play the TV’s audio through your stereo system. To connect an audio system Rear of Media receiver unit R–AUDIO–L AUDIO SUBWOOFER (VAR/FIX) R–AUDIO–L VIDEO S VIDEO VIDEO IN Use an audio cable to connect the TV’s audio output jacks to the audio receiver’s line input jacks.
  • Page 49: Sub Woofer

    Sub Woofer Use a monaural audio cable to connect the TV’s SUB WOOFER OUT jack to the sub woofer’s input jack. R–AUDIO–L AUDIO (VAR/FIX) R–AUDIO–L VIDEO S VIDEO VIDEO IN Rear of Media receiver unit Monaural audio cable (not supplied) VHF/UHF CONVERTER SUBWOOFER...
  • Page 50: Using The Control S Feature

    Using the CONTROL S Feature CONTROL S allows you to control your system and other Sony equipment with one remote control. In addition to allowing you to control multiple devices with one remote control, the CONTROL S feature allows you to always point your remote control at your TV, instead of having to point it at the other equipment, which might be hidden or out of direct line of sight.
  • Page 51: Setting Up The Channel List

    Setting Up the Channel List After you finish connecting your TV, you need to run Auto Setup to set up your channels. The Auto Setup screen appears when you turn on your TV for the first time after hooking it up. If you do not want to set up the channels at this time, you can do it later by selecting the Auto Program option in the Channel Menu (see page 84).
  • Page 53: Using The Remote Control

    Using the Remote Control Overview This chapter describes how to set up, program, and use the TV’s remote control. Topic Inserting Batteries Button Descriptions Programming the Remote Control Using Other Equipment with Your TV Remote Control Inserting Batteries Open the battery compartment as illustrated below. Insert two size AAA (LR03) batteries (supplied) by matching the terminals on the batteries to the diagram inside the battery compartment.
  • Page 54: Button Descriptions

    9 ANT 0 VOL +/– qa MENU qs Power qd TV/VIDEO * If not Sony brand, requires that you first program the remote control (page 54). Description Press to mute the sound. Press again or press restore the sound. Press once to display the current channel number, current time, and channel label.
  • Page 55 Button Description qf 0 - 9 Press 0 - 9 to select a channel; the channel changes after 3 ENTER ENTER seconds. Press qg RESET Press to reset the settings to the factory defaults. See pages 78 and 80. Also used to clear Favorite Channels (see page 65).
  • Page 56: Programming The Remote Control

    Beta, Ed Beta VCRs 8 mm VCR VHS VCR DVD player If you have video equipment other than Sony brand that you want to control with the TV’s remote control, use the following procedure to program the remote control. Notes The equipment must have infrared (IR) remote capability in order to be used with the remote control.
  • Page 57 Manufacturer’s Codes VCRs Manufacturer Code Sony 301, 302, 303 Admiral (M. Ward) Aiwa 338, 344 Audio Dynamic 314, 337 Broksonic 319, 317 Canon 309, 308 Citizen Craig 302, 332 Criterion Curtis Mathes 304, 338, 309 Daewoo 341, 312, 309 314, 336, 337...
  • Page 58: Using Other Equipment With Your Tv Remote Control

    To Do This ... Switch the TV’s input to the VCR, DVD player, or other connected equipment Set up the TV remote control to operate non-Sony equipment Operating a VCR To Do This ... Activate the remote control to operate the VCR...
  • Page 59: Operating A Cable Box

    Operating a Cable To Do This ... Activate the remote control to operate the cable box Turn on/off Select a channel Change channels Back to previous channel Operating a DVD Player To Do This ... Activate the remote control to operate the DVD Play Stop...
  • Page 61: Using The Features

    Using the Features Overview This chapter describes how to use the features of your TV. Topic Watching TV Using Wide Mode Using Twin View Using Favorite Channels Using the Freeze Function Using Picture Off Using the Memory Stick Picture Viewer Page...
  • Page 62: Watching Tv

    Watching TV z For a complete list of all To Do This ... the functions of the remote Activate the remote control to control, see page 52. operate the TV Turn on/off the TV Tune directly to a channel Adjust the volume Mute the volume Alternate back and forth between two channels...
  • Page 63: Using Wide Mode

    Using Wide Mode Wide Screen mode lets you watch 4:3 normal broadcasts in several Wide Screen modes. z Wide Zoom is recommended for 4:3 picture to prevent image retention. z You can also access the Wide Mode settings in the Screen menu.
  • Page 64: Using Twin View

    Using Twin View Twin View lets you see two pictures from two sources — from an antenna, VCR, DVD, etc. — on the screen at the same time. You hear the sound from only one of the sources at a time, but you can choose which source’s sound is selected.
  • Page 65: Activating The Picture

    Activating the To activate the picture in the Picture right window Functions Available in the Active Window To Do This ... Tune to a channel Adjust the volume Mute the volume Switch the TV’s input between sources connected to the TV’s A/V inputs Change the picture size Press b.
  • Page 66: Changing The Picture Size

    Changing the The zoom feature lets you vary the relative size of the left and right pictures. Picture Size When you adjust the picture sizes, the TV memorizes the change. The next time you use the Twin View function, the memorized sizes appear. Press to activate the picture that you want to resize.
  • Page 67: Using Favorite Channels

    Using Favorite Channels The Favorite Channels feature lets you select programs from a list of up to eight favorite channels that you specify. Creating a List of Favorite Channels z For details on using the Channel Menu, see page Displaying a List of Favorite Channels z To assign Channel Labels (e.g., ABC, HBO,...
  • Page 68: Using The Freeze Function

    Using the Freeze Function FREEZE use this feature to write down information such as phone numbers, recipes, etc. allows you to temporarily capture a program’s picture. You can The Freeze feature is not available while you are using the Twin View feature.
  • Page 69: Using Picture Off

    Using Picture Off The Picture Off feature lets you enjoy music from radio programs of digital broadcasts or DVDs with the TV screen turned off. This feature turns off the display unit only. OFF. Press The PICTURE OFF LED lights up in blue and the screen turns off. To cancel and return to normal viewing, press any button except for +/–, POWER, MUTING...
  • Page 70: Using The Memory Stick Picture Viewer

    Supported Image This TV’s Memory Stick viewer can display only still images that have been Types recorded on Memory Stick media by Sony brand digital still and video cameras. Recorded images must also meet the following specifications: You cannot write to Memory Stick media using the TV.
  • Page 71: Unsupported Image Types

    About DCF File Names Most Sony brand digital still and video cameras automatically record still images using DCF compliant directory and file names, as shown in the following example: Unsupported Image This TV’s Memory Stick viewer cannot display any of the following:...
  • Page 72: Inserting And Removing A Memory Stick

    Inserting and To insert a Memory Stick Removing a Memory Stick To remove a Memory Stick z When removing the Memory Stick, do not attempt to just pull it from its slot. Follow steps 1-3 (right). INPUT SELECT CHANNEL + VOL –...
  • Page 73 Pull the Memory Stick completely out of the slot. To protect small children from injury from Memory Stick Media, remove all Memory Stick media from the TV’s Memory Stick slot and store it in a safe location when it is not in use.
  • Page 74: Displaying The Memory Stick Menu

    Displaying the Memory Stick Menu Insert a Memory Stick that contains the images you want to view. For details, see page 70. Press MEMORY STICK on the remote control. The Memory Stick Menu appears. Memory Stick Index Slideshow Setup Move: Select: To select an option, press Option...
  • Page 75: Using The Memory Stick Index

    Using the Memory The Memory Stick Index lets you view images that are on the Memory Stick Stick Index in an index of thumbnail images. z The Page and folder ) buttons are available only if the Memory Stick contains more images or folders than can be displayed on one screen.
  • Page 76: Using The Memory Stick Slideshow

    Using the Memory The Memory Stick Slideshow lets you watch a slideshow of the images that Stick Slideshow are on the Memory Stick. Changing the Memory Stick Setup Options Insert a Memory Stick that contains the images you want to view. For details, see page 70.
  • Page 77: Using The Rotate Picture Screen

    Using the Rotate The Rotate Picture Screen lets you rotate an image from an index of Picture Screen thumbnails. z The Page and folder ) buttons are available only if the Memory Stick contains more images or folders than can be displayed on one screen.
  • Page 79: Overview

    Using the Menus Overview The Menu gives you access to the following features: Menu Icon z Press MENU to enter and exit Menus. Navigating Through Menus To Do This ... Display the Menu Move through the Menus Move through the Menu options z Menus include navigation help text that Select an option to change...
  • Page 80: Using The Video Menu

    Using the Video Menu To select the Video Menu To restore the factory default settings for the Video settings (excluding Advanced Video) of the Mode (Vivid, Standard, etc.) the TV is set to: Selecting Video The Video Menu includes the following options: Options Option z To change from one...
  • Page 81 Option Noise Reduction DRC Function options Function are not available (grayed out) when watching 480p, 720p, and 1080i sources. z For best results, adjust the Reality by pressing until you are satisfied with the level of detail. Then adjust the Clarity by pressing until you have a smooth image.
  • Page 82: Using The Audio Menu

    Using the Audio Menu To select the Audio Menu To restore the factory default settings for Treble, Bass, and Balance Selecting Audio The Audio Menu includes the following options: Options Option Treble Bass Balance Steady Sound Effect z To change quickly from one MTS to another, use MTS/SAP on the remote...
  • Page 83 Option Description Speaker Select to turn on the TV speakers. Select to turn off the TV speakers and listen to the TV’s sound only through your external audio system speakers. Audio Out This option can be set only when the Off.
  • Page 84: Using The Screen Menu

    Using the Screen Menu To select the Screen Menu Selecting Screen The Screen menu includes the following options: Mode Options Option z To change from one Wide Mode to another, Wide Mode WIDE on the remote Select a Wide control. Mode to use for 4:3 sources.
  • Page 85 z If 4:3 Default is set to Option anything but Off, the Wide 4:3 Default Mode setting changes only Select the default for the current channel. Screen Mode to When you change use for 4:3 sources channels (or inputs), Wide Mode is automatically replaced with the...
  • Page 86: Using The Channel Menu

    Using the Channel Menu To select the Channel Menu Selecting Channel The Channel Menu includes the following options: Options Option Favorite Channels Cable Channel Fix Useful when you have a cable box or satellite receiver connected Auto Program Press MENU. Press to highlight the Channel icon and press...
  • Page 87 Option z Channels that you set Channel to be skipped can be Skip/Add accessed only with the buttons. Channel Label is not available (grayed out) Channel Label when watching 480p, 720p, and 1080i sources. Description Allows you to customize the channel list that appears when you use the CH+/–...
  • Page 88: Using The Parent Menu

    Using the Parent Menu The Parent Menu allows you to set up the TV to block programs according to their content and rating levels. To select the Parent Menu Selecting Parent The Parent Menu includes the following options: Options z If you are not familiar Option with the Parental Guideline Parental Lock...
  • Page 89: Us Models: Selecting Custom Rating Options

    US Models: For US models, the Custom Rating Menu includes the following options. Selecting Custom (For Canadian models, see page 88.) Rating Options Option z The Content-Based Movie Rating Ratings are linked to the level of the Age-Based Rating. For example, a program with an Age- Based Rating of TV-PG V...
  • Page 90: Canadian Models: Selecting Custom Rating Options

    Canadian Models: For Canadian models, the Custom Rating Menu includes the following Selecting Custom options. (For US models, see page 87 Rating Options Option English Rating French Rating U.S.A. Rating Viewing Blocked You can view blocked programs by entering the password. Press Programs when tuned to a blocked program, then enter the password.
  • Page 91: Using The Setup Menu

    Allows you to select from three closed caption modes (for programs that are broadcast with closed caption). CC1-CC4 Text1-Text4 Info Allows you to illuminate the Sony logo on the front panel of the display unit. Caption Vision: Off Illuminated Video Label...
  • Page 92 Option z When selecting Game, or Web, the TV decreases Video Label brightness to prevent image retention. z The Skip label is useful for inputs that do not have equipment connected to them. Game Picture Language Description Allows you to identify A/V equipment you connected to the TV, such as a VCR, DVD, etc.
  • Page 93 Option Clock/Timers z To go directly to programming Timer 1 or 2, press instead of pressing b. BackLight Description Lets you set the clock on your TV and allows you to program your TV for scheduled viewing using the Timers. Sleep Allows you to select the time in minutes (15, 30, 45, 60, or 90) that you...
  • Page 95: Overview

    Other Information Overview This chapter includes the following topics: Topic Glossary Notes on Using Memory Stick Media Contacting Sony Troubleshooting Specifications Optional Accessories Index Page...
  • Page 96: Glossary

    Glossary analog signal A signaling method that uses continuous changes in the amplitude or frequency of an electronic transmission to convey information. aspect ratio Refers to the ratio between the width and height of the screen. This TV has a wide screen, as opposed to a 4:3 aspect ratio.
  • Page 97: Notes On Using Memory Stick Media

    Notes on Using Memory Stick Media Memory Stick When using Memory Stick media, follow these precautions: Precautions To avoid permanent damage to still image data, do not turn off the TV or remove Memory Stick media from the insertion slot while data is being read (as indicated by the Memory Stick indicator light being on).
  • Page 98: Contacting Sony

    Contacting Sony If, after reading these operating instructions, you have additional questions related to the use of your Sony television, please call our Customer Information Services Center at 1-800-222-SONY (7669) (US residents only) or (416) 499-SONY (7669) (Canadian residents only).
  • Page 99: Remote Control

    There may be more than one code for the equipment that you are attempting to operate. There is a possibility that some non-Sony equipment cannot be operated by your Sony TV remote.You may need to use the equipment’s original remote control.
  • Page 100: Video

    If your TV does not turn on, and a red light keeps flashing, your TV may need service. Call your local Sony Service Center. Make sure the power cord is plugged in. POWER Press on the front of the media receiver unit.
  • Page 101: Audio

    Audio Problem Possible Remedies Good picture, no sound Audio noise Cannot gain enough volume when using a cable box Sound seems weak or insufficient Cannot raise the volume on external speakers Channels Problem Possible Remedies Cannot receive upper channels (UHF) when using an antenna TV is fixed to one channel Cannot receive any channels when using cable TV...
  • Page 102: General

    General Problem Possible Remedies How to restore Video settings to factory settings How to restore Audio settings to factory settings Cannot cycle through the other video equipment connected to the TV Cannot operate Menu Lost password LED on the display unit is lit RESET Press on the remote control while in the Video Menu (see page 78).
  • Page 103: Specifications

    Specifications Panel System Display resolution Antenna Television System Channel Coverage Power Requirements Inputs/Outputs DVI-HDTV Video (IN) S Video (IN) Audio (IN) Component Video Input CONTROL S (OUT) Variable/Fixed Audio (OUT) Monitor/Fixed Audio (OUT) Sub woofer (OUT) RF Inputs Converter Screen Size (measured diagonally) Speaker Output Dimensions (W ×...
  • Page 104 Power Consumption Supplied Accessories Design and specifications are subject to change without notice. In Use Display unit Media receiver unit In Standby Under 1.5 W Remote Control (1) RM-927Y AAA (LR03) Batteries (2) AC power code (2) Display interface cable (1) Antenna cable (1) LDM-3000: 150 W MBT-XBR900L: 36 W...
  • Page 105: Optional Accessories

    Optional Accessories A/V Cable (VMC-810/820/830 HG) Audio Cable (RKC-515HG) Component Video Cable (VMC-10/30 HG) Control S Cable (RK-G69HG) 10M display interface cable (VMC-P10) Memory Stick media: 8 MB (MSA-8A); 16 MB (MSA-16A); 32 MB (MSA-32A); 64 MB (MSA-64A); 128 MB (MSA-128A) Wall mount unit: SU-PW1...
  • Page 106: Index

    Index 0-9 buttons 53, 60 16:9 aspect ratio 61 4:3 aspect ratio 61 4:3 Default settings 83 ANT button 52, 60 antenna, connecting 22–24 Audio Menu 77, 80 Audio Out 81 audio receiver, connecting 46 Auto Program (channel setup) 49, 84 Auto SAP, MTS setting 80 AUX jack, described 18 BackLight 91...
  • Page 107 FUNCTION button and indicators 52 Game Picture 90 GUIDE button 52 HD/DVD IN (1080i/720p/480p/480i) jacks, described 19 hue, adjusting 78 INPUT SELECT button 17 interlaced 94 J, K JUMP button 52, 60 label channels 85 Language, setting 90 LOCK switch, Memory Stick 75 MDP, using with TV remote control 57 Media receiver unit connecting 21...
  • Page 108 rotate picture, Memory Stick 75 S VIDEO jack, described 17, 18 SAT/CABLE indicator 52 SAT/CABLE power button 52 satellite receiver, using with TV remote control 56 setting up channels 49 Setup Menu 89 sharpness, adjusting 78 Simulated, Effect 80 sizing, picture in Twin View 64 slideshow 74 speakers turning on/off 81...
  • Page 112 Printed on 100% recycled paper. Printed in Japan...

Table of Contents