Advertisement
(v)
COUNTER RESET
2
3
4
During recording or playback, the digits on the
counter indicate the recording or playback time.
Press COUNTER RESET at the beginning of the
tape so that the counter shows "0:00:00". Write
down the counter reading at a particular point so
that you can easily find that point later by
referring to the tape counter.
(v)
1
2
3
4
During playback, press COUNTER RESET
at the point you want to locate later.
Press [] when the playback is finished, as
usual.
Press ZERO MEM.
The "ZERO MEM" indication blinks in the
viewfinder.
Press _
or IH_.
The tape rewinds or advances and stops
automatically when the counter reaches
approximately
"0:00:00".
Notes on the tape counter and ZERO MEM button
• The counter reading and the point of the tape may
not correspond exactly. Use the counter as a guide.
There will be a time lag of several seconds especially
when you repeat fast-forward running/rewinding
or
when you play back a tape recorded in both LP and
SP modes mixed.
• Be sure to press ZERO MEM after you stop the tape.
It does not function during playback.
• The ZERO MEM mode is canceled automatically
once the tape is rewound or sent forward to the point
where you pre-registered.
51
Advertisement
