Advertisement
(A-8)
Inserting
batteries
(A-e)
Insert two size AA (R6) batteries with polarity
positioned
correctly.
(A-9)
il ! !
Remotely controllable area
(A-S)
Point the Commander towards the remote sensor
(a).
Note on batteries
With normal operation, batteries will last for about six
months. However, if the commander will not be used for
a long period, remove the batteries to avoid possible
damage from battery leakage.
Notes on the Remote Commander
• Keep the remote sensor away from the strong light
source such as direct sunlight or illumination. Remote
control with the Commander may not be effective.
• Be sure that there is no obstacle between the remote
sensor and Commander.
• The command mode of the Commander is VTR2.
Avoid to use the Sony VCRs with the same command
mode at the same time.
Be sure to set the REMOTE COMMANDER ON/OFF
switch on the camcorder to "OFF" when you connect
the receiver of a remote control kit (not supplied) to
the REMOTE U control connector.
10
Advertisement
