Advertisement
(K-2)
2
(L)
(K-2)
1
2
Slide open the AUTO LOCK cover.
Press SHUTTER SPEED repeatedly until
the desired shutter speed indication
appears.
Each time you press the button, the indication
changes as follows.
->No indication(1/60) _ 100 (1/100)_ 250 (1/250)_]
4000 (1/4000)
_ 2000 (1/2000)
_-- 1000 (1/1000)
Notes
• When you select shutter speed 1/250 or faster,
record under sunlight or use a video light.
• When you record a TV screen with certain shutter
speeds, the brightness of the recorded picture may
vary.
• When you shoot a very bright subject at a faster
shutter speed, a light vertical, belt-like line (smear)
may appear on the screen.
• When you record at certain shutter speeds under a
light discharged tube, such as a fluorescent lamp,
sodium lamp, or mercury lamp, the brightness of the
recorded picture may vary.
In this camcorder, the iris is automatically
controlled. However, when shooting a subject that
is backlit, that is, if the light source is coming in
from behind the subject, use the BACK LIGHT
button. (L)
1
Slide open the AUTO LOCK cover.
2
Press BACK LIGHT.
The [] indication appears.
After shooting
Be sure to release this adjustment setting by
pressing BACK LIGHT again. (The [] indication
goes out.)
Otherwise, the recorded picture will be too bright.
34
Advertisement
